P1064 Chrysler Code - Cylinder 4 Oil Supply Solenoid Valve Stuck
Quick Answer
The P1064 Chrysler code indicates that there is an issue with the Cylinder 4 Oil Supply Solenoid Valve being stuck. Common causes include Debris or sludge buildup in the solenoid valve, Electrical issues such as a faulty wiring connection, Mechanical failure of the solenoid valve. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P1064 Chrysler indicates Cylinder 4 Oil Supply Solenoid Valve Stuck.
- Common causes
- Common causes include Debris or sludge buildup in the solenoid valve, Electrical issues such as a faulty wiring connection, Mechanical failure of the solenoid valve.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1064 Chrysler Description
The P1064 Chrysler code indicates that there is an issue with the Cylinder 4 Oil Supply Solenoid Valve being stuck. This valve is responsible for controlling the oil flow to the cylinder, ensuring proper lubrication and performance. When this valve becomes stuck, it can disrupt the oil supply to the cylinder, leading to a variety of issues.
Common Causes of P1064 Chrysler
- Debris or sludge buildup in the solenoid valve
- Electrical issues such as a faulty wiring connection
- Mechanical failure of the solenoid valve
- Contaminated or degraded engine oil
- Poor maintenance practices leading to valve sticking
Symptoms of P1064 Chrysler
- Engine misfires
- Reduced power and acceleration
- Rough idling or stalling
- Poor fuel efficiency
- Illumination of the Check Engine Light
How to Fix P1064 Chrysler
- Diagnose the issue by using a scan tool to read the code and identify the specific cylinder affected.
- Inspect the Cylinder 4 Oil Supply Solenoid Valve for any debris or sludge buildup and clean or replace as needed.
- Check the wiring connections to the solenoid valve for any damage or corrosion and repair or replace as necessary.
- Test the solenoid valve operation to ensure proper function and oil flow to the cylinder.
- Clear the fault code and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P1064 Chrysler
The typical repair costs for addressing a Cylinder 4 Oil Supply Solenoid Valve Stuck code can range from $200 to $500, depending on the specific vehicle make and model, the extent of the issue, and the labor rates in your area. Keep in mind that additional costs may apply if other components need to be replaced or if further diagnostics are required. It's advisable to consult with a qualified mechanic or auto repair shop to get an accurate estimate for your particular situation.
Need more information about the P1064 Chrysler code?
Need more information on how to fix the P1064 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1064 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1064 Chrysler Code
What does the OBDII code P1064 mean in a Chrysler vehicle?
Code P1064 indicates that the Cylinder 4 Oil Supply Solenoid Valve is stuck, which can cause issues with variable valve timing or cylinder management.
What are common symptoms of the P1064 code in a Chrysler?
Symptoms may include reduced engine performance, rough idling, misfires, poor fuel economy, and an illuminated check engine light.
What causes the Cylinder 4 Oil Supply Solenoid Valve to become stuck?
Causes can include oil contamination, sludge buildup, mechanical failure of the solenoid, or electrical issues like a damaged wiring harness or connector.
Can a dirty engine oil cause the P1064 code?
Yes, dirty or degraded oil can lead to sludge buildup, which can obstruct the solenoid valve and trigger this code.
How do you diagnose the P1064 code in a Chrysler?
Diagnosis typically involves using an OBDII scanner, inspecting the solenoid valve and wiring, checking oil quality, and verifying proper oil pressure.
Is it safe to drive with the P1064 code active?
Driving with this code is not recommended, as it can lead to engine damage or decreased performance if the issue worsens.
How can the P1064 code be fixed?
Repairs may include replacing the oil supply solenoid valve, cleaning the valve, addressing wiring or electrical faults, or performing an oil change if contamination is an issue.
What tools are needed to fix a P1064 code?
Common tools include an OBDII scanner, basic hand tools for solenoid removal, and potentially a multimeter to test electrical connections.
Does the P1064 code always require a solenoid replacement?
No, sometimes cleaning the solenoid or addressing wiring issues can resolve the problem without replacing the part.
Can regular oil changes help prevent the P1064 code?
Yes, maintaining clean engine oil can minimize the risk of sludge buildup and keep the oil supply solenoid functioning properly.
Discuss the causes and fixes for P1064 Chrysler OBDII Code
Code P1064 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.