Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost to diagnose the P1052 Cadillac code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
As reductant will freeze at temperatures below -11°C (12°F), there are 2 reductant heaters. Reductant heater 1 is integral to the Emission Reduction Fluid Supply Pump Module, located in the reductant tank. Reductant heater 2 is located in the supply line to the reductant injector. The Engine Control Module (ECM) monitors the reductant temperature in the tank in order to determine if the fluid is below its freeze point. If the ECM determines that the reductant may be frozen, it activates a "defrost strategy", by energizing the reductant heaters. The heaters are deactivated when the fluid temperature exceeds a calibrated value. The Diagnostic Trouble Code (DTC) will be set when the ECM indicates the reductant tank heater temperature is over the calibrated threshold for greater than 5 s.
Need more information on how to fix the P1052 Cadillac code? Get Access to Factory Service Manuals
Get the P1052 Cadillac code diagnosed by a professional: Find a repair shop in your area