Engine-CodesInfiniti – P1052 2004 Infiniti G35

P1052 2004 Infiniti G35 Code - Air Fuel Ratio Sensor 1 Heater Control Circuit High Bank 2

Quick Answer

The P1052 code on a 2004 Infiniti G35 indicates a problem with the Air Fuel Ratio Sensor 1 Heater Control Circuit on Bank 2. Common causes include Faulty Air Fuel Ratio Sensor: The sensor itself may be defective and require replacement, Wiring Issues: Damage or corrosion in the wiring harness connected to the sensor can disrupt the heater control circuit, ECM Malfunction: A problem with the engine control module can also trigger this code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1052 2004 Infiniti G35 indicates Air Fuel Ratio Sensor 1 Heater Control Circuit High Bank 2.
Common causes
Common causes include Faulty Air Fuel Ratio Sensor: The sensor itself may be defective and require replacement, Wiring Issues: Damage or corrosion in the wiring harness connected to the sensor can disrupt the heater control circuit, ECM Malfunction: A problem with the engine control module can also trigger this code.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 27, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1052 2004 Infiniti G35 Description

The P1052 code on a 2004 Infiniti G35 indicates a problem with the Air Fuel Ratio Sensor 1 Heater Control Circuit on Bank 2. This sensor is responsible for monitoring the air-fuel mixture in the exhaust system and sending data to the engine control module (ECM) for optimal fuel efficiency and emissions control. The heater control circuit is designed to keep the sensor at a specific temperature for accurate readings. When the circuit is detected to be operating at a high voltage, it means that the sensor's heating element is not functioning properly, which can lead to inaccurate readings and affect the vehicle's performance.

OBDII Code P1052 2004 Infiniti G35 - Air Fuel Ratio Sensor 1 Heater Control Circuit High Bank 2
P1052 2004 Infiniti G35 Code - Air Fuel Ratio Sensor 1 Heater Control Circuit High Bank 2

Common Causes of P1052 2004 Infiniti G35

  1. Faulty Air Fuel Ratio Sensor: The sensor itself may be defective and require replacement.
  2. Wiring Issues: Damage or corrosion in the wiring harness connected to the sensor can disrupt the heater control circuit.
  3. ECM Malfunction: A problem with the engine control module can also trigger this code.
  4. Exhaust System Leak: A leak in the exhaust system can affect the sensor's readings and trigger the code.
  5. Sensor Contamination: Contaminants such as oil or coolant can interfere with the sensor's operation.

Symptoms of P1052 2004 Infiniti G35

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
  2. Poor Fuel Economy: A malfunctioning Air Fuel Ratio Sensor can lead to decreased fuel efficiency as the engine may not be receiving accurate data for optimal combustion.
  3. Rough Idle: The engine may experience rough idling or hesitation when the sensor is not functioning correctly.
  4. Increased Emissions: A faulty sensor can cause an increase in emissions output, potentially leading to a failed emissions test.

How to Fix P1052 2004 Infiniti G35

  1. Diagnose the Issue: Use a scan tool to retrieve the specific code and perform a visual inspection of the sensor and wiring.
  2. Replace Air Fuel Ratio Sensor: If the sensor is found to be faulty, replace it with a new one compatible with the vehicle.
  3. Check Wiring: Inspect the wiring harness for any damage or corrosion and repair or replace as needed.
  4. Clear Codes: After completing the repair, clear the diagnostic trouble codes from the ECM using a scan tool.
  5. Test Drive: Take the vehicle for a test drive to ensure that the issue has been resolved and the check engine light does not reappear.

Cost to Fix P1052 2004 Infiniti G35

The cost of repairing a P1052 code on a 2004 Infiniti G35 can vary depending on the specific cause of the issue. In general, the replacement of an Air Fuel Ratio Sensor can range from $100 to $300, while labor costs can add an additional $100 to $200. Wiring repairs or ECM diagnostics may incur additional charges. Overall, the total repair cost for this issue could range from $200 to $500. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local providers for a more accurate estimate.

When is the Code Detected?

The current amperage in the heated air fuel ratio (A/F) sensor 1 heater circuit is out of the normal range. An excessively high voltage signal is sent to Engine Control Module (ECM) through the heated air fuel ratio (A/F) sensor 1 heater.

Need more information about the P1052 2004 Infiniti G35 code?

Need more information on how to fix the P1052 2004 Infiniti G35 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1052 2004 Infiniti G35 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1052 2004 Infiniti G35 Code

1. What are the common symptoms of OBDII code P1052 in a 2004 Infiniti G35?

- Common symptoms include poor fuel efficiency, rough idling, and the illumination of the Check Engine Light.

2. What does the OBDII code P1052 mean for a 2004 Infiniti G35?

- The code indicates a malfunction in the Air Fuel Ratio Sensor 1 Heater Control Circuit on Bank 2 of the engine.

3. What are the possible causes of OBDII code P1052 in a 2004 Infiniti G35?

- Possible causes include a faulty air fuel ratio sensor, damaged wiring or connectors, or a problem with the engine control module.

4. How can I diagnose the cause of OBDII code P1052 in my 2004 Infiniti G35?

- Diagnosis typically involves checking the sensor's wiring and connectors for damage, testing the sensor's resistance, and verifying proper voltage supply.

5. Can I continue driving my 2004 Infiniti G35 with OBDII code P1052?

- It is not recommended to continue driving with this code as it can lead to decreased fuel efficiency and potential damage to the engine over time.

6. Is it possible to repair OBDII code P1052 in a 2004 Infiniti G35 myself?

- While some DIY enthusiasts may attempt the repair, it is recommended to consult a professional mechanic for accurate diagnosis and proper repair.

7. How much does it typically cost to repair OBDII code P1052 in a 2004 Infiniti G35?

- The cost of repair can vary depending on the underlying cause, but it may range from $200 to $500 for parts and labor.

8. What are some tips for preventing OBDII code P1052 in a 2004 Infiniti G35?

- Regular maintenance, such as replacing the air fuel ratio sensor at recommended intervals, can help prevent this code from appearing.

9. Can a faulty air fuel ratio sensor cause other issues in a 2004 Infiniti G35?

- Yes, a faulty sensor can lead to poor engine performance, increased emissions, and potential damage to the catalytic converter if left unrepaired.

10. How long does it typically take to repair OBDII code P1052 in a 2004 Infiniti G35?

- The repair time can vary depending on the exact cause of the issue, but it may take a few hours to a full day for a skilled mechanic to diagnose and fix the problem.

Discuss the causes and fixes for P1052 2004 Infiniti G35 OBDII Code

Code P1052 2004 Infiniti G35 comments

No comments found for this page.