P104B Dodge Code - Cylinder 4 Oil Supply Solenoid Valve Voltage Out Of Range
Quick Answer
The P104B diagnostic trouble code for Dodge vehicles specifically indicates an issue with the Cylinder 4 Oil Supply Solenoid Valve Voltage being out of range. Common causes include Faulty Cylinder 4 Oil Supply Solenoid Valve, Wiring or connector issues related to the solenoid valve, ECM malfunction or software glitch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P104B Dodge indicates Cylinder 4 Oil Supply Solenoid Valve Voltage Out Of Range.
- Common causes
- Common causes include Faulty Cylinder 4 Oil Supply Solenoid Valve, Wiring or connector issues related to the solenoid valve, ECM malfunction or software glitch.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P104B Dodge Description
The P104B diagnostic trouble code for Dodge vehicles specifically indicates an issue with the Cylinder 4 Oil Supply Solenoid Valve Voltage being out of range. This valve is responsible for controlling the flow of oil to cylinder 4 in the engine, ensuring proper lubrication and performance. When the voltage output from the solenoid valve is detected to be outside of the expected range, it can lead to various performance issues and potential long-term damage if left unaddressed.
Common Causes of P104B Dodge
- Faulty Cylinder 4 Oil Supply Solenoid Valve
- Wiring or connector issues related to the solenoid valve
- ECM malfunction or software glitch
- Low oil pressure or contaminated oil affecting valve operation
- Mechanical damage to the valve or related components
Symptoms of P104B Dodge
- Rough idling or unstable engine performance
- Engine misfires or hesitation during acceleration
- Decreased power output and responsiveness
- Reduced fuel efficiency
- Engine stalling or difficulty starting
How to Fix P104B Dodge
- Perform a thorough diagnostic scan to confirm the P104B code and pinpoint the exact cause of the issue.
- Inspect the Cylinder 4 Oil Supply Solenoid Valve for any signs of damage or malfunction, and replace if necessary.
- Check the wiring harness and connectors associated with the solenoid valve for any corrosion, breaks, or loose connections, repairing or replacing as needed.
- Test the oil pressure and quality to ensure proper lubrication of cylinder 4, addressing any issues that may be affecting the solenoid valve's operation.
- Clear the diagnostic trouble codes, reset the ECM, and test drive the vehicle to confirm that the issue has been resolved.
Cost to Fix P104B Dodge
The typical repair costs for addressing a Cylinder 4 Oil Supply Solenoid Valve Voltage Out Of Range issue can vary depending on the exact cause of the problem and the labor rates in your area. In general, parts for the solenoid valve replacement can range from $100 to $300, while labor costs can add another $100 to $200 to the total bill. Additional costs for diagnostic testing, oil pressure checks, and any other necessary repairs may also apply.
Need more information about the P104B Dodge code?
Need more information on how to fix the P104B Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P104B Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P104B Dodge Code
What does the OBDII code P104B mean on a Dodge?
The code P104B indicates that the voltage for the Cylinder 4 Oil Supply Solenoid Valve is out of range, which may affect the operation of the variable valve timing system.
What are the common symptoms of code P104B?
Symptoms may include a check engine light, rough idling, reduced engine performance, poor fuel economy, or difficulty starting the vehicle.
What causes the P104B code to appear?
Common causes include a faulty Cylinder 4 Oil Supply Solenoid Valve, damaged wiring or connectors, low engine oil levels, or contamination in the oil passages.
Can low oil levels trigger the P104B code?
Yes, insufficient oil levels or dirty oil can affect the operation of the solenoid valve and trigger this code.
How do I diagnose the P104B code?
Diagnosis involves checking the solenoid valve, inspecting the wiring and connectors for damage, verifying proper oil levels, and testing the circuit with a multimeter.
Can I continue driving with the P104B code?
Driving with this code is not recommended, as it may lead to further engine performance issues or potential damage to internal engine components.
How do I fix the P104B code?
Repairs may include replacing the Cylinder 4 Oil Supply Solenoid Valve, repairing damaged wiring, cleaning oil passages, or performing an oil change if needed.
How much does it typically cost to repair the P104B code?
Repair costs vary depending on the issue but may range from $150 to $400, including parts and labor, for solenoid replacement or wiring repairs.
Can a dirty oil filter cause the P104B code?
Yes, a clogged oil filter can restrict oil flow to the solenoid valve, leading to voltage issues and triggering the code.
Do I need special tools to fix the P104B code?
Basic tools like a multimeter and socket set may suffice, but advanced diagnostics may require a scan tool capable of reading live data and testing solenoids.
Discuss the causes and fixes for P104B Dodge OBDII Code
Code P104B Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.