P1049 2016 GMC Sierra Code - Reductant Injector High Control Circuit High Voltage
Quick Answer
The P1049 diagnostic trouble code (DTC) in a 2016 GMC Sierra indicates a problem with the reductant injector high control circuit high voltage. Common causes include Faulty reductant injector, Damaged wiring or connectors in the control circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1049 2016 GMC Sierra indicates Reductant Injector High Control Circuit High Voltage.
- Common causes
- Common causes include Faulty reductant injector, Damaged wiring or connectors in the control circuit, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1049 2016 GMC Sierra Description
The P1049 diagnostic trouble code (DTC) in a 2016 GMC Sierra indicates a problem with the reductant injector high control circuit high voltage. In vehicles equipped with a Selective Catalytic Reduction (SCR) system, the reductant injector is responsible for injecting a urea-based solution (AdBlue) into the exhaust stream to reduce harmful emissions. The high voltage in the control circuit suggests an electrical issue that may prevent the reductant injector from functioning properly.
Common Causes of P1049 2016 GMC Sierra
- Faulty reductant injector
- Damaged wiring or connectors in the control circuit
- Malfunctioning ECM
- Issues with the AdBlue system
- Corrosion or moisture damage in the electrical components
Symptoms of P1049 2016 GMC Sierra
- Check Engine Light illuminated
- Reduced fuel efficiency
- Increased emissions output
- Failed emissions test
- Reduced engine performance
How to Fix P1049 2016 GMC Sierra
- Perform a thorough diagnostic scan to confirm the P1049 code and identify the specific issue.
- Inspect the reductant injector, wiring, and connectors for any visible damage or corrosion.
- Test the voltage in the control circuit to pinpoint the source of the high voltage issue.
- Replace the faulty reductant injector, repair any damaged wiring or connectors, and reset the ECM.
- Clear the DTC and perform a road test to ensure the issue has been resolved.
Cost to Fix P1049 2016 GMC Sierra
** The typical repair costs for addressing a P1049 code in a 2016 GMC Sierra can range from $200 to $600, depending on the specific cause of the issue and the parts needed for repair. This estimate includes the cost of a new reductant injector, wiring repairs, and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. Rates may be higher at dealerships or in metropolitan areas, while independent shops may offer lower prices. For a more precise estimate, it's recommended to consult with a local auto repair shop.
Need more information about the P1049 2016 GMC Sierra code?
Need more information on how to fix the P1049 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1049 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1049 2016 GMC Sierra Code
1. What does the OBDII code P1049 mean on a 2016 GMC Sierra?
P1049 indicates a "Reductant Injector High Control Circuit High Voltage," meaning the system detects higher-than-expected voltage in the reductant injector circuit.
2. What are the common symptoms of code P1049 in a 2016 GMC Sierra?
Symptoms may include the check engine light turning on, reduced engine performance, increased emissions, and issues with the diesel exhaust fluid (DEF) system.
3. What causes the P1049 code in a 2016 GMC Sierra?
Common causes include a faulty reductant injector, wiring or connector issues in the reductant control circuit, a malfunctioning reductant control module, or an electrical short.
4. Can I drive my 2016 GMC Sierra with a P1049 code?
While the vehicle may still drive, continuing to operate it with this code can lead to increased emissions and potential damage to the DEF system.
5. How do I diagnose the P1049 code on a 2016 GMC Sierra?
Diagnose the issue by inspecting the wiring and connectors for damage, testing the reductant injector for proper operation, and using a multimeter to check for high voltage in the circuit.
6. How can the P1049 code be fixed on a 2016 GMC Sierra?
Repairs may include replacing the reductant injector, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the reductant control module.
7. What tools are needed to troubleshoot the P1049 code?
You’ll need an OBDII scanner, a multimeter, and possibly a wiring diagram for the reductant system to properly diagnose the issue.
8. Is the reductant injector the same as the DEF injector?
Yes, the reductant injector is responsible for injecting DEF into the exhaust system to reduce emissions in diesel engines.
9. How much does it cost to repair a P1049 code on a 2016 GMC Sierra?
Repair costs vary but may range from $100 for minor wiring repairs to $500 or more if the reductant injector or control module needs replacement.
10. Can a faulty reductant heater cause the P1049 code on a 2016 GMC Sierra?
No, a reductant heater issue typically triggers a different code. P1049 specifically relates to high voltage in the reductant injector circuit.
Discuss the causes and fixes for P1049 2016 GMC Sierra OBDII Code
Code P1049 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.