P1049 2014 GMC Sierra Code - Reductant Injector High Control Circuit High Voltage
Quick Answer
The P1049 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the reductant injector high control circuit high voltage. Common causes include Wiring Issues: Corrosion, damage, or loose connections in the wiring harness can disrupt the electrical signal to the reductant injector, Faulty Reductant Injector: The injector itself may be malfunctioning, causing it to operate at a higher voltage than intended, ECM Malfunction: Problems with the engine control module (ECM) can also lead to high voltage in the control circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1049 2014 GMC Sierra indicates Reductant Injector High Control Circuit High Voltage.
- Common causes
- Common causes include Wiring Issues: Corrosion, damage, or loose connections in the wiring harness can disrupt the electrical signal to the reductant injector, Faulty Reductant Injector: The injector itself may be malfunctioning, causing it to operate at a higher voltage than intended, ECM Malfunction: Problems with the engine control module (ECM) can also lead to high voltage in the control circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1049 2014 GMC Sierra Description
The P1049 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the reductant injector high control circuit high voltage. In vehicles equipped with a selective catalytic reduction (SCR) system, the reductant injector is responsible for injecting a urea-based solution (DEF - diesel exhaust fluid) into the exhaust stream to reduce harmful emissions. The high control circuit high voltage error suggests that there is an issue with the electrical circuit that controls the reductant injector, causing it to operate at a voltage level higher than expected.
Common Causes of P1049 2014 GMC Sierra
- Wiring Issues: Corrosion, damage, or loose connections in the wiring harness can disrupt the electrical signal to the reductant injector.
- Faulty Reductant Injector: The injector itself may be malfunctioning, causing it to operate at a higher voltage than intended.
- ECM Malfunction: Problems with the engine control module (ECM) can also lead to high voltage in the control circuit.
- Sensor Malfunction: Issues with sensors that monitor the reductant system can cause the ECM to incorrectly control the injector voltage.
Symptoms of P1049 2014 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Performance: The vehicle may experience a decrease in performance, including reduced power and acceleration.
- Increased Emissions: The vehicle may fail emissions tests or emit higher levels of pollutants due to the malfunctioning reductant injector.
- Poor Fuel Efficiency: The engine may consume more fuel than usual, leading to decreased fuel efficiency.
How to Fix P1049 2014 GMC Sierra
- Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble code and perform further testing to pinpoint the exact cause of the high voltage in the reductant injector control circuit.
- Inspect Wiring: Check the wiring harness for any signs of damage, corrosion, or loose connections. Repair or replace any faulty wiring as needed.
- Test Reductant Injector: Test the reductant injector to ensure it is functioning properly. Replace the injector if it is found to be faulty.
- Check ECM: Verify the functionality of the engine control module (ECM) and address any issues that may be causing the high voltage in the control circuit.
- Clear Codes and Test Drive: After completing the repairs, clear the diagnostic trouble codes from the ECM and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P1049 2014 GMC Sierra
The cost of repairing a P1049 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. In general, the cost of parts for this repair can range from $100 to $500, with labor costs adding an additional $100 to $300. Overall, the total repair cost could be anywhere from $200 to $800. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for more accurate pricing information.
Need more information about the P1049 2014 GMC Sierra code?
Need more information on how to fix the P1049 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1049 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1049 2014 GMC Sierra Code
What does the OBDII code P1049 mean on a 2014 GMC Sierra?
P1049 indicates a problem with the reductant injector high control circuit, specifically high voltage being detected.
What are the common symptoms of code P1049 on a GMC Sierra?
Symptoms may include the check engine light turning on, reduced engine performance, or issues with the diesel exhaust fluid (DEF) system.
What causes the P1049 code to appear?
Common causes include a faulty reductant injector, damaged wiring or connectors in the reductant control circuit, or issues with the reductant control module.
Can I drive my 2014 GMC Sierra with the P1049 code?
It is not recommended to drive for extended periods as the issue may affect the vehicle's emissions system and could lead to further damage.
How do I diagnose the P1049 code?
Start by using an OBDII scanner to confirm the code, then inspect the wiring and connectors for damage, and test the reductant injector for proper operation.
What tools do I need to fix the P1049 code?
You’ll need an OBDII scanner, a multimeter for testing voltage, and possibly replacement parts like a reductant injector or wiring components.
How much does it cost to fix the P1049 code?
Repair costs can vary, but replacing a reductant injector typically costs between $200 and $500, while wiring repairs may cost less depending on complexity.
Can a software issue cause the P1049 code?
While rare, a faulty reductant control module or outdated software could potentially cause this code and may require reprogramming or replacement.
How do I prevent the P1049 code from recurring?
Regularly inspect and maintain the DEF system, including the reductant injector and wiring, and address any warning signs promptly.
Will clearing the P1049 code fix the problem?
Clearing the code without addressing the underlying issue is only a temporary solution, and the code will likely return.
Discuss the causes and fixes for P1049 2014 GMC Sierra OBDII Code
Code P1049 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.