Engine-Codes - Buick - P1048 BUICK

P1048 BUICK Code - Reductant Injector High Control Circuit Low Voltage

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|P1048 BUICK code possible causes

  • Faulty Reductant Injector
  • Reductant Injector harness is open or shorted
  • Reductant Injector circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

|How is the P1048 BUICK code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|What is the cost to diagnose the P1048 BUICK code

Labor: 1.0

The cost to diagnose the P1048 BUICK code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are P1048 BUICK code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|What is P1048 BUICK code meaning?

The Reductant Injector is a component of selective catalytic reduction system used to dose the reductant fluid to the exhaust gas and participate in the reduction reactions. The Engine Control Module (ECM) calculates the injection time of the reductant injector based on the measurement of the NOx sensors. To activate the injector the ECM supplies a PWM signal to the high control circuit and the low control circuit is always commanded ON. The Diagnostic Trouble Code (DTC) will be set when the Reductant Control Module detects a short to ground in the high control circuit.

|Need more information with the P1048 BUICK code?

Need more information on how to fix the P1048 BUICK code?
Get Access to Factory Service Manuals

|Need help with a P1048 BUICK code?

Get the P1048 Buick code diagnosed by a professional: Find a repair shop in your area