P103E 2015 Chevrolet Silverado Code - Auxiliary Coolant Pump Control Signal Message Counter Incorrect
Quick Answer
The P103E diagnostic trouble code (DTC) for a 2015 Chevrolet Silverado indicates that the Auxiliary Coolant Pump Control Signal Message Counter is Incorrect. Common causes include Faulty auxiliary coolant pump control module, Wiring or connection issues between ECM and control module, ECM software malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P103E 2015 Chevrolet Silverado indicates Auxiliary Coolant Pump Control Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty auxiliary coolant pump control module, Wiring or connection issues between ECM and control module, ECM software malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P103E 2015 Chevrolet Silverado Description
The P103E diagnostic trouble code (DTC) for a 2015 Chevrolet Silverado indicates that the Auxiliary Coolant Pump Control Signal Message Counter is Incorrect. This code typically points to a communication issue between the engine control module (ECM) and the auxiliary coolant pump control module. The auxiliary coolant pump is responsible for circulating coolant through the engine to help regulate its temperature, especially during idle or low-speed driving conditions. When the ECM detects that the message counter from the auxiliary coolant pump control module is incorrect, it signifies a potential problem with the communication signal or the module itself.
Common Causes of P103E 2015 Chevrolet Silverado
- Faulty auxiliary coolant pump control module
- Wiring or connection issues between ECM and control module
- ECM software malfunction
- Electrical system issues
- Environmental factors such as extreme temperatures affecting communication signals
Symptoms of P103E 2015 Chevrolet Silverado
- Engine overheating
- Poor fuel efficiency
- Check engine light illuminated
- Rough idling or stalling
- Reduced heater performance
How to Fix P103E 2015 Chevrolet Silverado
- Begin by conducting a thorough inspection of the auxiliary coolant pump control module, checking for any visible signs of damage or corrosion. Replace the module if necessary.
- Inspect the wiring harness and connectors between the ECM and the control module for any breaks, frays, or loose connections. Repair or replace as needed.
- Perform a diagnostic scan to check for any stored trouble codes and to reset the ECM. Ensure that the communication signals between the modules are functioning correctly.
- Test the auxiliary coolant pump operation by activating it manually and monitoring the coolant circulation. Verify that the pump responds to the ECM's signals.
- Clear the DTC and test drive the vehicle to confirm that the issue has been resolved. Monitor the engine temperature and coolant levels to ensure proper operation.
Cost to Fix P103E 2015 Chevrolet Silverado
The typical repair costs for addressing a P103E code on a 2015 Chevrolet Silverado can range from $200 to $500, depending on the specific cause of the issue and the labor rates at the repair facility. This estimate includes the cost of parts such as a new auxiliary coolant pump control module, wiring repairs, and diagnostic scans. It's important to note that labor rates can vary significantly based on location and the type of repair shop, so it's advisable to obtain quotes from multiple sources before proceeding with the repair.
Need more information about the P103E 2015 Chevrolet Silverado code?
Need more information on how to fix the P103E 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P103E 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P103E 2015 Chevrolet Silverado Code
What does the OBDII code P103E mean for a 2015 Chevrolet Silverado?
The P103E code indicates an issue with the auxiliary coolant pump control signal, specifically that the message counter is incorrect or out of range.
What are the common symptoms of code P103E in a 2015 Chevrolet Silverado?
Symptoms may include the check engine light turning on, reduced engine cooling efficiency, or higher-than-normal engine temperatures.
What causes the P103E code to appear on a 2015 Chevrolet Silverado?
Common causes include a malfunctioning auxiliary coolant pump, wiring issues, a faulty control module, or incorrect communication between the pump and the ECM.
Can I drive my 2015 Chevrolet Silverado with the P103E code?
It’s not recommended to drive for an extended period with this code, as it could lead to reduced cooling performance and potential engine overheating.
How is the P103E code diagnosed?
A technician will use a scan tool to confirm the code, inspect the auxiliary coolant pump and wiring, and check for communication errors between the pump and the ECM.
What tools are needed to repair the P103E code?
Repairs may require a diagnostic scan tool, a multimeter for testing electrical connections, and possibly replacement parts like the auxiliary coolant pump.
How can I fix the P103E code on my 2015 Chevrolet Silverado?
Repairs might involve replacing the auxiliary coolant pump, repairing damaged wiring or connectors, or reprogramming/updating the ECM software.
How much does it cost to repair the P103E code on a Chevrolet Silverado?
Repair costs can vary but typically range from $150 to $500, depending on whether parts like the pump or wiring need to be replaced.
Is the P103E code a common issue on 2015 Chevrolet Silverados?
This code is relatively uncommon but may occur in vehicles with higher mileage or those with previous cooling system issues.
Can a faulty ECM cause the P103E code?
Yes, a malfunctioning ECM can cause communication errors that trigger the P103E code, though this is less common than pump or wiring issues.
Discuss the causes and fixes for P103E 2015 Chevrolet Silverado OBDII Code
Code P103E 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.