Engine-Codes - Dodge - P1037 Dodge

P1037 Dodge Code - Cylinder 1 Oil Supply Solenoid Valve Driver Short To Ground

- Code Popularity: 4,589 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 2/3
Table of contents

|What are the Possible Causes of the Code P1037 Dodge?

  • Faulty Variable Valve Actuator (VVA) Solenoid
  • Variable Valve Actuator Solenoid harness is open or shorted
  • Variable Valve Actuator Solenoid circuit poor electrical connection
  • Faulty Powertrain Control Module (PCM)

|How to Fix the P1037 Dodge Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|What is the Cost to Diagnose the Code P1037 Dodge?

Labor: 1.0

The cost to diagnose the P1037 Dodge code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your car have Safety Recalls? → Check here

|What are Code P1037 Dodge Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|What Does the P1037 Dodge Code Mean?

Multi-Air is an electronically controlled variable intake valve phase and lift system. Unlike conventional intake valve phase and lift system which controls all the cylinder intake valves simultaneously and in the same proportion; Multi-Air, through the use of an electronically controlled hydraulic link between the camshaft and intake valve, allows for each intake valve to be controlled independently. The valve lift and timing can be adjusted infinitely.
The Multi-Air valve train has a mechanical camshaft lobe acting on a hydraulic pump located between the camshaft intake lobe and the intake valve. The pump provides oil under pressure to a two-way electro-hydraulic solenoid valve called the Variable Valve Actuator (VVA) Solenoid. The VVA Solenoid is electronically controlled during the specific intake cam lobe event by the Powertrain Control Module (PCM). During the event, the VVA Solenoid is commanded to either hold oil pressure or bleed oil. The Variable Valve Actuator (VVA) Solenoid is a normally open solenoid. The PCM provides 12 volts to close the solenoid. The position of the VVA Solenoid determines the intake valve timing and lift. This change on valve action is similar to creating a change in the camshaft lobe profile affecting the lift and duration of the valve opening. The Diagnostic Trouble Code (DTC) will be set when the PCM detects a short to ground in the Solenoid Signal or Return circuit.

Cylinder 1 Oil Supply Solenoid Valve Driver Short To Ground

|Need more Information on the P1037 Dodge Code?

Need more information on how to fix the P1037 Dodge code? Get Access to Factory Service Manuals

|Need Help with the P1037 Dodge Code?

Get the P1037 Dodge code diagnosed by a professional: Find a repair shop in your area