P101C 2014 Chevrolet Silverado Code - Glow Plug Control Module Temperature Sensor 2 Circuit High Voltage
Quick Answer
The P101C diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado refers to an issue with the Glow Plug Control Module Temperature Sensor 2 Circuit registering high voltage. Common causes include Faulty Glow Plug Control Module Temperature Sensor 2, Wiring issues such as shorts or open circuits, Corrosion or poor connections in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P101C 2014 Chevrolet Silverado indicates Glow Plug Control Module Temperature Sensor 2 Circuit High Voltage.
- Common causes
- Common causes include Faulty Glow Plug Control Module Temperature Sensor 2, Wiring issues such as shorts or open circuits, Corrosion or poor connections in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P101C 2014 Chevrolet Silverado Description
The P101C diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado refers to an issue with the Glow Plug Control Module Temperature Sensor 2 Circuit registering high voltage. The glow plug control module is an essential component in diesel engines, responsible for controlling the glow plugs that help with cold starts by preheating the combustion chamber. The temperature sensor 2 circuit is designed to monitor the temperature of the glow plug control module to ensure it operates within the specified parameters.
Common Causes of P101C 2014 Chevrolet Silverado
- Faulty Glow Plug Control Module Temperature Sensor 2
- Wiring issues such as shorts or open circuits
- Corrosion or poor connections in the sensor circuit
- Malfunctioning glow plug control module
- Electrical system issues such as a blown fuse or relay failure
Symptoms of P101C 2014 Chevrolet Silverado
- Hard starting or extended cranking time
- Illumination of the check engine light
- Reduced engine power
- Decreased fuel efficiency
- Rough idling or misfiring
How to Fix P101C 2014 Chevrolet Silverado
- Diagnose the issue by using a scan tool to retrieve the DTC and perform a visual inspection of the sensor and wiring.
- Test the Glow Plug Control Module Temperature Sensor 2 using a multimeter to check for proper resistance and voltage readings.
- Inspect the wiring harness for any damage, corrosion, or loose connections and repair or replace as needed.
- Replace the Glow Plug Control Module Temperature Sensor 2 if it is found to be faulty.
- Clear the DTC and test the vehicle to ensure the issue has been resolved.
Cost to Fix P101C 2014 Chevrolet Silverado
The typical repair costs for addressing a P101C code on a 2014 Chevrolet Silverado can range from $150 to $400, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's recommended to inquire about local rates for a more accurate estimate.
Need more information about the P101C 2014 Chevrolet Silverado code?
Need more information on how to fix the P101C 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P101C 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P101C 2014 Chevrolet Silverado Code
1. What does the OBDII code P101C mean on a 2014 Chevrolet Silverado?
P101C indicates an issue with the Glow Plug Control Module (GPCM) Temperature Sensor 2 Circuit, specifically a high voltage condition.
2. What are the symptoms of code P101C on a 2014 Chevrolet Silverado?
Common symptoms include the check engine light turning on, difficulty starting in cold weather, and reduced engine performance.
3. What causes the P101C code on a 2014 Chevrolet Silverado?
Potential causes include a faulty temperature sensor, damaged wiring or connectors, a malfunctioning Glow Plug Control Module, or a bad electrical ground.
4. Can I drive my 2014 Chevrolet Silverado with a P101C code?
Driving is possible, but it’s not recommended as the issue may lead to poor engine performance, especially in cold conditions, and could cause further damage over time.
5. How do I diagnose the P101C code on a 2014 Chevrolet Silverado?
Diagnosis involves using an OBDII scanner, inspecting the wiring and connectors related to the Glow Plug Control Module, and testing the temperature sensor for proper voltage readings.
6. How can I fix the P101C code on my 2014 Chevrolet Silverado?
Repairs may include replacing the Glow Plug Control Module Temperature Sensor 2, repairing or replacing damaged wiring, or replacing the Glow Plug Control Module itself if faulty.
7. What tools do I need to fix a P101C code on a 2014 Chevrolet Silverado?
You’ll need an OBDII scanner, a multimeter for electrical testing, and basic hand tools for accessing and replacing components.
8. How much does it cost to repair a P101C code on a 2014 Chevrolet Silverado?
Repair costs vary but typically range from $100 to $300, depending on whether the temperature sensor or the Glow Plug Control Module needs replacement.
9. Can a bad battery cause the P101C code on a 2014 Chevrolet Silverado?
A weak or failing battery can sometimes cause erratic electrical signals, but it’s not a common cause of this specific code.
10. Does the P101C code affect fuel efficiency on a 2014 Chevrolet Silverado?
It can, as improper operation of the Glow Plug Control Module may lead to inefficient combustion during cold starts, which could impact fuel economy.
Discuss the causes and fixes for P101C 2014 Chevrolet Silverado OBDII Code
Code P101C 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.