P1014 BMW Code - Valvetronic Reference Eccentric Shaft Sensor Parity Error
Quick Answer
The P1014 BMW code refers to a Valvetronic Reference Eccentric Shaft Sensor Parity Error. Common causes include Faulty Valvetronic Reference Eccentric Shaft Sensor, Wiring or connection issues, ECM software malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1014 BMW indicates Valvetronic Reference Eccentric Shaft Sensor Parity Error.
- Common causes
- Common causes include Faulty Valvetronic Reference Eccentric Shaft Sensor, Wiring or connection issues, ECM software malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1014 BMW Description
The P1014 BMW code refers to a Valvetronic Reference Eccentric Shaft Sensor Parity Error. In BMW vehicles equipped with Valvetronic technology, the Valvetronic system is responsible for controlling the lift of the intake valves, allowing for variable valve timing and lift. The eccentric shaft sensor is a crucial component of the Valvetronic system, as it monitors the position of the eccentric shaft and provides feedback to the engine control module (ECM) for proper valve lift adjustment.
Common Causes of P1014 BMW
- Faulty Valvetronic Reference Eccentric Shaft Sensor
- Wiring or connection issues
- ECM software malfunction
- Mechanical issues with the Valvetronic system
- Engine overheating
Symptoms of P1014 BMW
- Rough idling or engine misfires
- Reduced engine power
- Poor fuel efficiency
- Check Engine Light illuminated
- Engine stalling or hesitation
How to Fix P1014 BMW
- Diagnose the issue by using a diagnostic scanner to retrieve the fault code and pinpoint the exact cause of the problem.
- Inspect the wiring and connections related to the Valvetronic Reference Eccentric Shaft Sensor for any signs of damage or corrosion.
- Test the sensor's functionality using a multimeter to ensure it is sending the correct signals to the ECM.
- Replace the Valvetronic Reference Eccentric Shaft Sensor if it is found to be faulty.
- Clear the fault code from the ECM memory and perform a test drive to ensure the issue has been resolved.
Cost to Fix P1014 BMW
The cost of repairing a Valvetronic Reference Eccentric Shaft Sensor Parity Error can vary depending on the specific cause of the issue and the labor rates in your area. On average, the cost of replacing the sensor and addressing any related issues can range from $200 to $500, including parts and labor. It is important to consult with a professional mechanic to get an accurate estimate based on your vehicle's make and model. Keep in mind that diagnostic time and labor rates can vary, so it's advisable to shop around for the best deal.
Need more information about the P1014 BMW code?
Need more information on how to fix the P1014 BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1014 BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1014 BMW Code
1. What is OBDII code P1014 on a BMW?
The P1014 code on a BMW refers to a "Valvetronic Reference Eccentric Shaft Sensor Parity Error," indicating a fault in the sensor's signal consistency used to adjust valve lift.
2. What are the common symptoms of error code P1014 in BMW?
Symptoms may include rough idling, poor engine performance, reduced fuel efficiency, and in some cases, the engine might enter a fail-safe mode to prevent damage, displayed through a check engine light.
3. What causes the P1014 error code to appear on my BMW?
Common causes include a faulty eccentric shaft sensor, wiring issues like shorts or disconnections, or mechanical problems within the Valvetronic system itself.
4. How can I diagnose the P1014 error code on my BMW?
Diagnosis typically involves using an OBDII scanner to confirm the code, visually inspecting the eccentric shaft sensor and associated wiring, and checking the operation of the Valvetronic system using specialized diagnostic tools.
5. What steps are involved in repairing the P1014 error code on a BMW?
Repair steps may include replacing the eccentric shaft sensor, repairing any faulty wiring, or addressing any mechanical issues in the Valvetronic system. Resetting the engine's computer system after repairs is also crucial to clear the code and retest the system.
6. Is it safe to drive a BMW with the P1014 code?
While it might be possible to drive, it is not advisable as the engine may not run efficiently, and prolonged driving could lead to further damage. It's best to address the issue as soon as possible.
7. Can I fix the P1014 BMW code myself or should I take it to a mechanic?
Depending on your technical skill and availability of the required diagnostic tools, you might be able to address simple wiring issues yourself. However, replacing the eccentric shaft sensor or performing intricate repairs to the Valvetronic system typically requires professional skills and tools.
8. How urgent is it to fix a BMW showing the P1014 code?
It is relatively urgent to fix this issue to prevent potential engine damage and to restore optimal engine performance and fuel efficiency. It is recommended to handle the repairs soon after the code appears.
Discuss the causes and fixes for P1014 BMW OBDII Code
Code P1014 BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.