P100E 2018 GMC Sierra Code - Accelerator Pedal Position Signal Message Counter Incorrect
Quick Answer
The P100E diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates that the Accelerator Pedal Position Signal Message Counter is Incorrect. Common causes include Faulty accelerator pedal position sensor, Wiring harness or connector issues, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P100E 2018 GMC Sierra indicates Accelerator Pedal Position Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Wiring harness or connector issues, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P100E 2018 GMC Sierra Description
The P100E diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates that the Accelerator Pedal Position Signal Message Counter is Incorrect. This code is typically associated with a discrepancy in the communication between the accelerator pedal position sensor and the engine control module (ECM). The accelerator pedal position sensor is responsible for sending signals to the ECM to determine the appropriate fuel delivery and throttle response based on the driver's input.
Common Causes of P100E 2018 GMC Sierra
- Faulty accelerator pedal position sensor
- Wiring harness or connector issues
- Malfunctioning ECM
- Software glitch in the ECM
- Electrical interference or shorts in the system
Symptoms of P100E 2018 GMC Sierra
- Poor acceleration and sluggish throttle response
- Rough idling or stalling
- Reduced fuel efficiency
- Limp mode activation
- Check Engine Light illuminated
How to Fix P100E 2018 GMC Sierra
- Begin by connecting a diagnostic scanner to retrieve the specific trouble code and freeze frame data.
- Inspect the wiring harness and connectors for any damage or corrosion. Repair or replace as necessary.
- Test the accelerator pedal position sensor using a multimeter to ensure it is sending accurate signals to the ECM.
- If the sensor is faulty, replace it with a new one and recalibrate as per manufacturer's instructions.
- Clear the trouble code and perform a test drive to verify that the issue has been resolved.
Cost to Fix P100E 2018 GMC Sierra
The typical repair costs for addressing a P100E code on a 2018 GMC Sierra can range from $200 to $500, including parts and labor. However, it is important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, while independent shops may charge less. It is recommended to obtain local quotes for a more accurate estimate.
Need more information about the P100E 2018 GMC Sierra code?
Need more information on how to fix the P100E 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P100E 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P100E 2018 GMC Sierra Code
1. What does the OBDII code P100E mean on a 2018 GMC Sierra?
P100E indicates that the Accelerator Pedal Position (APP) signal message counter is incorrect, often due to a communication mismatch between the pedal and the engine control module (ECM).
2. What are the common symptoms of code P100E in a 2018 GMC Sierra?
Symptoms may include reduced engine performance, activation of the check engine light, unresponsive acceleration, or the vehicle entering "limp mode."
3. What causes the P100E code on a GMC Sierra?
Common causes include a malfunctioning accelerator pedal position sensor, wiring issues in the APP circuit, software glitches in the ECM, or connector problems.
4. Can I still drive my 2018 GMC Sierra with the P100E code?
Driving with this code is not recommended, as it may lead to unsafe conditions like limited acceleration or sudden loss of power.
5. How can I fix the P100E code on my 2018 GMC Sierra?
Potential fixes include inspecting and repairing faulty wiring or connectors, replacing the accelerator pedal position sensor, and updating or reprogramming the ECM if needed.
6. How do I know if the accelerator pedal position sensor is faulty?
A faulty sensor may cause inconsistent throttle response, hesitation during acceleration, or the P100E code to trigger.
7. Can a dirty throttle body cause the P100E code?
A dirty throttle body is unlikely to cause this specific code, as it relates to the signal message counter in the APP circuit, not airflow issues.
8. Do I need to replace the ECM to fix code P100E?
Replacing the ECM is rarely necessary. First, troubleshoot the APP sensor, wiring, and connectors. Reprogramming the ECM may resolve the issue without replacing it.
9. How much does it cost to repair the P100E code on a 2018 GMC Sierra?
Repair costs can range from $100 to $500, depending on whether the accelerator pedal sensor needs replacing or if ECM reprogramming is required.
10. Can a loose connector cause the P100E code?
Yes, a loose or damaged connector in the APP circuit can disrupt communication and trigger the P100E code. Always inspect connectors during diagnosis.
Discuss the causes and fixes for P100E 2018 GMC Sierra OBDII Code
Code P100E 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.