P100E 2014 GMC Sierra Code - Accelerator Pedal Position Signal Message Counter Incorrect
Quick Answer
The P100E diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates that the Accelerator Pedal Position Signal Message Counter is Incorrect. Common causes include Faulty accelerator pedal position sensor, Wiring or connection issues between the sensor and ECM, ECM software or hardware malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P100E 2014 GMC Sierra indicates Accelerator Pedal Position Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Wiring or connection issues between the sensor and ECM, ECM software or hardware malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P100E 2014 GMC Sierra Description
The P100E diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates that the Accelerator Pedal Position Signal Message Counter is Incorrect. This code is typically associated with a discrepancy in the number of messages being sent by the accelerator pedal position sensor to the engine control module (ECM). The accelerator pedal position sensor is responsible for communicating the position of the accelerator pedal to the ECM, which then adjusts the fuel delivery and ignition timing accordingly to control the vehicle's speed and performance.
Common Causes of P100E 2014 GMC Sierra
- Faulty accelerator pedal position sensor
- Wiring or connection issues between the sensor and ECM
- ECM software or hardware malfunction
- Corrosion or damage to sensor or wiring
- Environmental factors such as moisture or debris affecting sensor operation
Symptoms of P100E 2014 GMC Sierra
- Check engine light illuminated
- Hesitation or lack of response when pressing the accelerator pedal
- Rough idling or uneven engine performance
- Reduced power or stalling while driving
How to Fix P100E 2014 GMC Sierra
- Begin by conducting a thorough inspection of the accelerator pedal position sensor, wiring, and connections for any visible damage or corrosion.
- Use a diagnostic scan tool to retrieve the specific data related to the P100E code and monitor the accelerator pedal position sensor's output.
- Test the sensor's functionality by manually operating the accelerator pedal and checking for consistent and accurate readings.
- If the sensor is found to be faulty, replace it with a new, OEM-quality accelerator pedal position sensor.
- Clear the DTC codes from the ECM's memory and perform a test drive to ensure that the issue has been resolved and the check engine light does not reappear.
Cost to Fix P100E 2014 GMC Sierra
The typical repair costs for addressing a P100E code on a 2014 GMC Sierra can vary depending on the specific cause of the issue and the labor rates in your area. In general, replacing the accelerator pedal position sensor and addressing any related wiring or connection issues can range from $150 to $300 for parts and labor. It's important to note that diagnostic time and labor rates at auto repair shops can fluctuate based on various factors, so it's recommended to obtain quotes from local shops for a more accurate estimate.
Need more information about the P100E 2014 GMC Sierra code?
Need more information on how to fix the P100E 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P100E 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P100E 2014 GMC Sierra Code
1. What does the OBDII code P100E mean on a 2014 GMC Sierra?
The code P100E indicates an issue with the Accelerator Pedal Position Signal Message Counter, often caused by inconsistencies in the data being sent from the accelerator pedal sensor to the engine control module (ECM).
2. What are the common symptoms of the P100E code?
Symptoms may include reduced engine performance, activation of limp mode, a check engine light, or unresponsive acceleration.
3. What causes the P100E code to trigger?
This code can be caused by a faulty accelerator pedal position (APP) sensor, wiring issues such as a loose or damaged connector, or a malfunction in the ECM.
4. Can I drive my 2014 GMC Sierra with the P100E code?
While the vehicle may still be drivable, it could experience reduced performance or limp mode, which may make driving unsafe. It’s best to address the issue promptly.
5. How do I diagnose the P100E code on my GMC Sierra?
Start by scanning for codes with an OBDII scanner, inspecting the APP sensor and its wiring for damage or loose connections, and checking live data from the sensor for irregularities.
6. How can I fix the P100E code?
Repairs may include replacing the accelerator pedal position sensor, repairing or replacing damaged wiring, or reprogramming or replacing the ECM if necessary.
7. How much does it cost to repair the P100E code?
Costs vary depending on the cause, with a new APP sensor typically costing $100–$300, plus labor. ECM repairs or replacements can be more expensive.
8. Can a dirty throttle body cause the P100E code?
A dirty throttle body is not a direct cause of this code but could contribute to throttle-related issues. Cleaning it may help if combined with other repairs.
9. Does the P100E code always require sensor replacement?
No, sometimes the issue is due to wiring problems or a software glitch in the ECM, which may not require sensor replacement.
10. Will clearing the P100E code with a scanner fix the problem?
Clearing the code may temporarily turn off the check engine light, but the root cause must be addressed to prevent the code from returning.
Discuss the causes and fixes for P100E 2014 GMC Sierra OBDII Code
Code P100E 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.