P1008 2016 GMC Sierra Code - Engine Coolant Bypass Valve Command Signal Message Counter Incorrect
Quick Answer
The P1008 diagnostic trouble code for a 2016 GMC Sierra indicates that there is an issue with the Engine Coolant Bypass Valve Command Signal Message Counter being incorrect. Common causes include Faulty Engine Coolant Bypass Valve, Wiring or electrical issues causing a poor connection between the ECM and the bypass valve, ECM software or programming issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1008 2016 GMC Sierra indicates Engine Coolant Bypass Valve Command Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Engine Coolant Bypass Valve, Wiring or electrical issues causing a poor connection between the ECM and the bypass valve, ECM software or programming issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1008 2016 GMC Sierra Description
The P1008 diagnostic trouble code for a 2016 GMC Sierra indicates that there is an issue with the Engine Coolant Bypass Valve Command Signal Message Counter being incorrect. This valve is responsible for regulating the flow of coolant through the engine, ensuring that it stays at the optimal operating temperature. When the signal message counter is incorrect, it means that the communication between the engine control module (ECM) and the bypass valve is not functioning as it should.
Common Causes of P1008 2016 GMC Sierra
- Faulty Engine Coolant Bypass Valve.
- Wiring or electrical issues causing a poor connection between the ECM and the bypass valve.
- ECM software or programming issues.
- Coolant system blockages or restrictions.
- Coolant temperature sensor malfunction.
Symptoms of P1008 2016 GMC Sierra
- Check engine light illuminated on the dashboard.
- Engine overheating or not reaching the optimal operating temperature.
- Decreased fuel efficiency.
- Engine performance issues, such as rough idling or stalling.
- Coolant leaks or unusual coolant levels.
How to Fix P1008 2016 GMC Sierra
- Begin by conducting a thorough inspection of the Engine Coolant Bypass Valve and its wiring connections to check for any visible damage or corrosion.
- Test the bypass valve using a multimeter to ensure it is functioning properly.
- Check the coolant system for any blockages or restrictions that may be affecting the flow of coolant.
- Inspect the coolant temperature sensor to determine if it is sending accurate readings to the ECM.
- If necessary, reprogram the ECM to ensure proper communication with the bypass valve.
Cost to Fix P1008 2016 GMC Sierra
The typical repair costs for addressing the P1008 code on a 2016 GMC Sierra can range from $150 to $500, depending on the specific cause of the issue and the extent of the repairs needed. This estimate includes the cost of parts and labor. It's important to note that diagnosis time and labor rates can vary between auto repair shops, with rates typically ranging from $80 to $150 per hour. It's advisable to check with local shops for a more accurate estimate based on your location and vehicle specifics.
Need more information about the P1008 2016 GMC Sierra code?
Need more information on how to fix the P1008 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1008 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1008 2016 GMC Sierra Code
1. What does the OBDII code P1008 mean on a 2016 GMC Sierra?
The code P1008 indicates an issue with the engine coolant bypass valve command signal, where the message counter is incorrect or inconsistent.
2. What are the common symptoms of the P1008 code?
Symptoms may include an illuminated check engine light, potential overheating issues, poor heater performance, or reduced engine efficiency.
3. What causes the P1008 code on a 2016 GMC Sierra?
Common causes include a faulty engine coolant bypass valve, wiring or connector issues, a malfunctioning powertrain control module (PCM), or corrupted communication signals.
4. Can the P1008 code cause engine damage?
If left unresolved, the P1008 code can lead to improper coolant flow, potentially causing overheating and damage to the engine.
5. How do you diagnose the P1008 code?
A technician will typically use a scan tool to check for related codes, inspect the coolant bypass valve and its wiring, and test the signal communication between the valve and the PCM.
6. How is the P1008 code fixed?
Repairs may include replacing the engine coolant bypass valve, repairing damaged wiring or connectors, or reprogramming or replacing the PCM if necessary.
7. Can I drive with the P1008 code on my 2016 GMC Sierra?
While the vehicle may still be drivable, it’s not recommended as the issue can lead to overheating and further engine damage.
8. How much does it cost to repair the P1008 code?
Repair costs vary depending on the cause but may range from $150 to $500, including parts and labor.
9. Does the P1008 code require a software update?
In some cases, a PCM software update may be necessary to resolve communication issues causing the P1008 code.
10. Can a low coolant level trigger the P1008 code?
While low coolant levels are not a direct cause, they can contribute to overheating issues that may compound the problem with the coolant bypass valve system.
Discuss the causes and fixes for P1008 2016 GMC Sierra OBDII Code
Code P1008 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.