P1005 2018 GMC Sierra Code - Fuel Pump Driver Control Module Enable Too Many Resets
Quick Answer
The P1005 diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates that the Fuel Pump Driver Control Module (FPDM) has undergone too many resets. Common causes include Faulty FPDM, Electrical issues, Wiring problems. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1005 2018 GMC Sierra indicates Fuel Pump Driver Control Module Enable Too Many Resets.
- Common causes
- Common causes include Faulty FPDM, Electrical issues, Wiring problems.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1005 2018 GMC Sierra Description
The P1005 diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates that the Fuel Pump Driver Control Module (FPDM) has undergone too many resets. The FPDM is a crucial component in the fuel system of the vehicle, responsible for regulating the fuel pump operation. When this code is triggered, it means that the FPDM has exceeded the allowable number of resets, which can lead to various issues with the fuel delivery system.
Common Causes of P1005 2018 GMC Sierra
- Faulty FPDM
- Electrical issues
- Wiring problems
- Corrosion in the fuel system
- Poor fuel quality
Symptoms of P1005 2018 GMC Sierra
- No-start condition
- Intermittent stalling
- Rough idling
- Poor acceleration
- Decreased fuel efficiency
How to Fix P1005 2018 GMC Sierra
- Perform a thorough inspection of the FPDM and associated wiring for any visible signs of damage or corrosion.
- Test the FPDM using a multimeter to check for proper voltage and continuity.
- Replace the FPDM if it is found to be faulty.
- Clear the DTC and reset the vehicle's computer to ensure the code does not reappear.
- Test drive the vehicle to verify that the issue has been resolved and that the fuel pump is operating correctly.
Cost to Fix P1005 2018 GMC Sierra
The typical repair costs for addressing a P1005 code on a 2018 GMC Sierra can vary depending on the specific cause of the issue. On average, replacing a faulty FPDM can cost between $200 and $500, including parts and labor. However, it is essential to note that diagnosis time and labor rates at auto repair shops can vary significantly, with hourly rates typically ranging between $80 and $150. Factors such as location, vehicle make and model, and engine type can also impact the final repair costs. It is recommended to obtain quotes from multiple reputable auto repair shops to get a more accurate estimate for this repair.
Need more information about the P1005 2018 GMC Sierra code?
Need more information on how to fix the P1005 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1005 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1005 2018 GMC Sierra Code
1. What does the OBDII code P1005 mean on a 2018 GMC Sierra?
P1005 indicates that the Fuel Pump Driver Control Module (FPCM) has experienced too many resets, suggesting a possible issue with the module itself or related systems.
2. What are the common symptoms of code P1005 in a 2018 GMC Sierra?
Symptoms may include difficulty starting the vehicle, reduced engine performance, stalling, or the check engine light being illuminated.
3. What causes the P1005 code to appear in a GMC Sierra?
Common causes include a failing Fuel Pump Driver Control Module, wiring or connector issues, low system voltage, or software glitches.
4. Can a weak battery cause the P1005 code?
Yes, a weak or failing battery can cause voltage fluctuations that may lead to excessive resets of the Fuel Pump Driver Control Module.
5. How can I diagnose the P1005 code on my 2018 GMC Sierra?
Start by checking the battery and charging system, inspecting the FPCM wiring and connectors for damage or corrosion, and scanning for related codes with an OBDII scanner.
6. Is it safe to drive with the P1005 code active?
Driving with the P1005 code may lead to poor performance or stalling, which can be unsafe. It’s best to address the issue promptly.
7. How is the P1005 code typically fixed?
Repairs may include replacing the Fuel Pump Driver Control Module, fixing damaged wiring or connectors, reprogramming the module, or resolving battery and voltage issues.
8. Can the P1005 code be cleared without repairs?
The code may temporarily clear if reset with an OBDII scanner, but it will likely return if the underlying issue isn’t resolved.
9. How much does it cost to fix a P1005 code on a GMC Sierra?
Repair costs vary but may range from $150 to $600, depending on whether the FPCM needs replacement or if only wiring repairs are required.
10. Does a recall exist for the Fuel Pump Driver Control Module on 2018 GMC Sierra trucks?
As of now, no specific recall addresses this issue, but it’s worth checking with GMC or your dealer for any service bulletins or updates.
Discuss the causes and fixes for P1005 2018 GMC Sierra OBDII Code
Code P1005 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.