P0D26 GMC Code - Battery Charger System Precharge Time Too Long
|P0D26 GMC code possible causes
- Faulty Hybrid/EV Battery Charger Receptacle
- Hybrid/EV Battery Charger Receptacle harness is open or shorted
- Hybrid/EV Battery Charger Receptacle circuit poor electrical connection
|How is the P0D26 GMC code repair?
Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the P0D26 GMC code
The cost to diagnose the P0D26 GMC code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are P0D26 GMC code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is P0D26 GMC code meaning?
Before connecting the battery charger to the hybrid/EV battery pack, it is necessary to raise the voltage level of the battery charger output to match the hybrid/EV battery pack voltage. This is called the precharge of the battery charger. During precharge, the charging positive contactor is closed. Also the drive motor battery charger cable needs to be plugged into the hybrid/EV battery charger receptacle and utility power needs to be enabled to the vehicle. The hybrid/EV powertrain control module 2 monitors the amount of time it takes to achieve the proper pre-charge voltage.