P0CE6 BUICK Code - Hybrid/EV Battery Pack Coolant Control Valve Position Sensor Circuit Low Voltage
|P0CE6 BUICK code possible causes
- Faulty Hybrid/EV Battery Pack Coolant Control Valve Position Sensor
- Hybrid/EV Battery Pack Coolant Control Valve Position Sensor harness is open or shorted
- Hybrid/EV Battery Pack Coolant Control Valve Position Sensor circuit poor electrical connection
|How is the P0CE6 BUICK code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the P0CE6 BUICK code
Labor: 1.0The cost to diagnose the P0CE6 BUICK code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are P0CE6 BUICK code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is P0CE6 BUICK code meaning?The valve provides position feedback to the hybrid/EV powertrain control module 2 based on a potentiometer in the valve. The hybrid/EV powertrain control module 2 uses this feedback to monitor the valve position. Different valve positions correspond to different resistance values. The hybrid/EV powertrain control module 2 determines the resistance values corresponding to the end stop positions of the valve by moving the valve to an end-stop and back to its original position when the vehicle is first turned on. This is referred to as the hybrid/EV powertrain control module 2
|Need more information with the P0CE6 BUICK code?Need more information on how to fix the P0CE6 BUICK code?
Get Access to Factory Service Manuals