P0C9E GMC - 14V Power Module Output Current Sensor Circuit Low Current
P0C9E GMC Possible Causes
- Faulty Starter Generator Control Module
- Starter Generator Control Module harness is open or shorted
- Starter Generator Control Module circuit poor electrical connection
How do I fix code P0C9E GMC
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0C9E GMC code
Labor: 1.0The cost of diagnosing the P0C9E GMC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
P0C9E GMC Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0C9E GMC MeaningThe generator control module also called the starter generator control module is comprised of the following three control modules; the hybrid powertrain control module, 14 volt power module and the drive motor control module. These three control modules are non serviceable and are part of the generator control module.
The 14V power module has 2 current sensors, one for input and one for output current measurements. This diagnostic checks the output current sensor. These current sensors are internal to the 14V power module and are not serviced separately from the generator control module.
P0C9E GMC More InformationNeed more information on how to fix the P0C9E GMC code?
Get Access to Factory Service Manuals