Engine-Codes - Cadillac - P0C9E CADILLAC

P0C9E CADILLAC Code - 14V Power Module Output Current Sensor Circuit Low Current

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What is this?
Table of contents

|P0C9E CADILLAC code possible causes

  • Faulty Starter Generator Control Module
  • Starter Generator Control Module harness is open or shorted
  • Starter Generator Control Module circuit poor electrical connection

|How is the P0C9E CADILLAC code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|What is the cost to diagnose the P0C9E CADILLAC code

Labor: 1.0

The cost to diagnose the P0C9E CADILLAC code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are P0C9E CADILLAC code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|What is P0C9E CADILLAC code meaning?

The generator control module also called the starter generator control module is comprised of the following three control modules; the hybrid powertrain control module, 14 volt power module and the drive motor control module. These three control modules are non serviceable and are part of the generator control module.
The 14V power module has 2 current sensors, one for input and one for output current measurements. This diagnostic checks the output current sensor. These current sensors are internal to the 14V power module and are not serviced separately from the generator control module.

|Need more information with the P0C9E CADILLAC code?

Need more information on how to fix the P0C9E CADILLAC code?
Get Access to Factory Service Manuals

|Need help with a P0C9E CADILLAC code?

Get the P0c9e Cadillac code diagnosed by a professional: Find a repair shop in your area