P0C68 - Generator Position Sensor Circuit 'A' Intermittent/Erratic
P0C68 Possible Causes
- Faulty Inverter with converter assembly
- Faulty Hybrid vehicle generator assembly
- Faulty Hybrid vehicle motor assembly
- Wire harness or connector
First diagnose P0C68 code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the P0C68 code
Labor: 1.0The cost of diagnosing the P0C68 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
P0C68 Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0C68 MeaningA resolver is a sensor that is used to detect the position of the magnetic poles the rotor of a motor generator. Knowing the position of the poles is indispensable for ensuring precise control of MG2 and MG1.
Each resolver contains a stator that has an excitation coil and 2 detection coils (S, C). The gap between the stator and rotor changes as the rotor turns because the rotor is oval shaped. An alternating current with a predetermined frequency flows through the excitation coil, and detection coils S and C output alternating currents in accordance with the sensor rotor position.
The inverter with converter assembly (MG ECU) detects the absolute position of the rotor according to the phases of detection coils S and C and the heights of their waveforms. Furthermore, the CPU calculates the amount of change in the position within a predetermined length of time, in order to use the resolver as a speed sensor.
The MG ECU monitors signals output from the motor resolver and detects malfunctions.
P0C68 More InformationNeed more information on how to fix the P0C68 code?
Get Access to Factory Service Manuals