P0C61 GMC Code - Drive Motor 2 Position Sensor Circuit 2 Low Voltage
Quick Answer
The P0C61 code for GMC vehicles indicates an issue with the Drive Motor 2 Position Sensor Circuit 2 registering low voltage. Common causes include Faulty Drive Motor 2 Position Sensor, Wiring issues or shorts in the circuit, Corrosion or damage to electrical connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C61 GMC indicates Drive Motor 2 Position Sensor Circuit 2 Low Voltage.
- Common causes
- Common causes include Faulty Drive Motor 2 Position Sensor, Wiring issues or shorts in the circuit, Corrosion or damage to electrical connectors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0C61 GMC Description
The P0C61 code for GMC vehicles indicates an issue with the Drive Motor 2 Position Sensor Circuit 2 registering low voltage. This sensor is crucial for monitoring the position of the drive motor, which is responsible for propelling the vehicle in electric or hybrid vehicles. When the voltage in this circuit is lower than expected, it can lead to erratic performance of the drive motor and impact the vehicle's overall efficiency and drivability.
Common Causes of P0C61 GMC
- Faulty Drive Motor 2 Position Sensor
- Wiring issues or shorts in the circuit
- Corrosion or damage to electrical connectors
- Software glitches in the electric powertrain control module
- Battery issues affecting voltage supply to the drive motor sensor
Symptoms of P0C61 GMC
- Reduced electric drive performance
- Loss of power or acceleration
- Check Engine Light illuminated
- Inability to switch between electric and hybrid modes
- Unusual noises coming from the drive motor
How to Fix P0C61 GMC
- Diagnose the exact cause of the low voltage in the Drive Motor 2 Position Sensor Circuit 2 using a diagnostic scanner.
- Inspect the sensor, wiring, and connectors for any visible damage or corrosion.
- Test the voltage output of the sensor and compare it to the manufacturer's specifications.
- Replace the Drive Motor 2 Position Sensor if it is found to be faulty.
- Clear the fault codes and perform a test drive to ensure the issue has been resolved.
Cost to Fix P0C61 GMC
The typical repair costs for addressing a P0C61 code in a GMC vehicle can range from $200 to $500, including parts and labor. However, prices may vary depending on the specific model of the vehicle, the location of the repair shop, and the availability of parts. It's recommended to consult with a certified technician or auto repair shop for a more accurate estimate based on your vehicle's requirements. Labor rates at auto repair shops typically range from $80 to $150 per hour.
Need more information about the P0C61 GMC code?
Need more information on how to fix the P0C61 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C61 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C61 GMC Code
What does the OBDII code P0C61 mean on a GMC vehicle?
P0C61 indicates that the Drive Motor 2 Position Sensor Circuit 2 is experiencing low voltage, which may affect the performance of the hybrid or electric drive motor system.
What are the common symptoms of the P0C61 code in a GMC?
Symptoms may include reduced power, erratic or limited acceleration, warning lights such as the check engine light or hybrid system malfunction, and possible stalling.
What causes the P0C61 code to be triggered?
Common causes include a faulty drive motor position sensor, damaged or corroded wiring, poor electrical connections, or issues with the hybrid drive motor control module.
How can I diagnose the P0C61 code?
Start by scanning the vehicle with an OBDII scanner, inspect the wiring and connectors for damage or corrosion, and test the position sensor's functionality using a multimeter.
Can I drive my GMC with the P0C61 code active?
It is not recommended to drive with this code active, as it can lead to reduced performance, safety concerns, and potential damage to the hybrid or electric drivetrain.
How much does it cost to fix the P0C61 code?
Repair costs can vary but may include $100–$300 for a diagnostic check and $200–$700 or more if the drive motor position sensor needs replacement.
Is the P0C61 code related to the hybrid or electric drive system?
Yes, this code specifically pertains to the hybrid or electric drive motor system and its position sensor, which monitors motor rotation for proper operation.
What tools are needed to troubleshoot the P0C61 code?
Common tools include an OBDII scanner, a digital multimeter for testing voltage, and possibly wiring diagrams for the specific GMC model.
Can a software update fix the P0C61 code?
In some cases, a software update to the hybrid control module may resolve the issue if it is related to a programming glitch, but this is less common.
What should I check first when diagnosing the P0C61 code?
Begin by inspecting the wiring and connectors associated with Drive Motor 2 Position Sensor Circuit 2 for visible damage, looseness, or corrosion.
Discuss the causes and fixes for P0C61 GMC OBDII Code
Code P0C61 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.