P0C5C 2017 GMC Sierra Code - Drive Motor Position Sensor Circuit 2 Low Voltage
Quick Answer
The P0C5C diagnostic trouble code (DTC) for a 2017 GMC Sierra refers to the Drive Motor Position Sensor Circuit 2 Low Voltage. Common causes include Faulty drive motor position sensor, Wiring issues in the sensor circuit, Connector problems. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C5C 2017 GMC Sierra indicates Drive Motor Position Sensor Circuit 2 Low Voltage.
- Common causes
- Common causes include Faulty drive motor position sensor, Wiring issues in the sensor circuit, Connector problems.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0C5C 2017 GMC Sierra Description
The P0C5C diagnostic trouble code (DTC) for a 2017 GMC Sierra refers to the Drive Motor Position Sensor Circuit 2 Low Voltage. This code indicates that there is an issue with the drive motor position sensor circuit, specifically related to low voltage. In hybrid or electric vehicles like the GMC Sierra, the drive motor position sensor plays a crucial role in monitoring the position of the motor to ensure proper operation and efficiency.
Common Causes of P0C5C 2017 GMC Sierra
- Faulty drive motor position sensor
- Wiring issues in the sensor circuit
- Connector problems
- Control module malfunction
- Water or corrosion damage
Symptoms of P0C5C 2017 GMC Sierra
- Reduced power output
- Erratic motor operation
- Decreased fuel efficiency
- Drivability issues
- Illumination of the check engine light
How to Fix P0C5C 2017 GMC Sierra
- Begin by conducting a thorough inspection of the drive motor position sensor circuit, checking for any visible damage or loose connections.
- Test the drive motor position sensor using a multimeter to determine if it is functioning within specifications.
- Inspect the wiring harness for any signs of damage, corrosion, or wear, and repair or replace as necessary.
- Check the connectors for proper contact and secure connections, addressing any issues found.
- If the issue persists, consider replacing the drive motor position sensor or the control module, following manufacturer guidelines.
Cost to Fix P0C5C 2017 GMC Sierra
The typical repair costs for addressing a P0C5C code on a 2017 GMC Sierra can vary depending on the specific cause of the issue and the extent of repairs needed. In general, the cost of parts for a drive motor position sensor or control module replacement can range from $100 to $500, while labor costs may add an additional $100 to $300. Overall, the total repair cost could fall within the range of $200 to $800. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
Need more information about the P0C5C 2017 GMC Sierra code?
Need more information on how to fix the P0C5C 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C5C 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C5C 2017 GMC Sierra Code
1. What does the OBDII code P0C5C mean on a 2017 GMC Sierra?
P0C5C indicates a low voltage condition in Circuit 2 of the Drive Motor Position Sensor, which monitors the position of the electric motor in hybrid or electric vehicles.
2. What are the common symptoms of code P0C5C on a GMC Sierra?
Symptoms may include reduced engine performance, check engine light illumination, limited hybrid system operation, or difficulty shifting.
3. What causes the P0C5C code to appear on a 2017 GMC Sierra?
Common causes include a faulty drive motor position sensor, damaged wiring or connectors in Circuit 2, or issues with the hybrid control module.
4. Can a P0C5C code affect vehicle performance?
Yes, it can lead to reduced performance, limited hybrid capabilities, or even the vehicle entering a limp mode to protect the drivetrain.
5. How do you diagnose the P0C5C code on a GMC Sierra?
Diagnosis involves scanning for codes, inspecting wiring and connectors for damage, testing the drive motor position sensor, and checking the hybrid control module for faults.
6. Is it safe to drive with a P0C5C code on a 2017 GMC Sierra?
Driving with this code is not recommended as it may cause further damage to the hybrid system or lead to unsafe driving conditions.
7. How can you fix the P0C5C code on a GMC Sierra?
Repairs may include replacing the drive motor position sensor, repairing damaged wiring or connectors, or reprogramming/repairing the hybrid control module.
8. How much does it cost to repair the P0C5C code on a 2017 GMC Sierra?
Repair costs can vary, but replacing the drive motor position sensor typically ranges from $200 to $600, excluding labor.
9. Can a weak battery cause the P0C5C code in a GMC Sierra?
Yes, a weak or failing hybrid battery may contribute to low voltage conditions triggering this code.
10. Will clearing the code fix the P0C5C issue on a GMC Sierra?
Clearing the code without addressing the underlying issue will not fix the problem, and the code is likely to return.
Discuss the causes and fixes for P0C5C 2017 GMC Sierra OBDII Code
Code P0C5C 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.