P0C28 Mercury Code - Electric Transmission Fluid Pump Motor Current Low
Quick Answer
The P0C28 code for a Mercury vehicle indicates that there is an issue with the Electric Transmission Fluid Pump Motor Current being low. Common causes include Faulty transmission fluid pump motor, Damaged wiring or connectors, Malfunctioning transmission control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C28 Mercury indicates Electric Transmission Fluid Pump Motor Current Low.
- Common causes
- Common causes include Faulty transmission fluid pump motor, Damaged wiring or connectors, Malfunctioning transmission control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0C28 Mercury Description
The P0C28 code for a Mercury vehicle indicates that there is an issue with the Electric Transmission Fluid Pump Motor Current being low. The electric transmission fluid pump motor plays a crucial role in maintaining the proper pressure and flow of transmission fluid within the vehicle's transmission system. When the current is low, it can lead to a variety of issues that can impact the overall performance and efficiency of the vehicle.
Common Causes of P0C28 Mercury
- Faulty transmission fluid pump motor
- Damaged wiring or connectors
- Malfunctioning transmission control module
- Low transmission fluid levels
- Electrical issues within the transmission system
Symptoms of P0C28 Mercury
- Erratic shifting
- Transmission slippage
- Hesitation during acceleration
- Overheating of the transmission system
- Inability to move the vehicle
How to Fix P0C28 Mercury
- Begin by conducting a thorough inspection of the transmission fluid pump motor and related components.
- Test the current flow in the transmission fluid pump motor to determine if it is indeed low.
- Check for any damaged wiring or connectors and repair or replace as needed.
- Inspect the transmission control module for any faults and address any issues found.
- Refill the transmission fluid to the proper levels and reset the code to see if the issue persists.
Cost to Fix P0C28 Mercury
The typical repair costs for addressing a P0C28 code in a Mercury vehicle can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, the cost of parts and labor for this type of repair can range from $200 to $500. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's recommended to obtain quotes from multiple sources to get a more accurate estimate for your specific situation.
Need more information about the P0C28 Mercury code?
Need more information on how to fix the P0C28 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C28 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C28 Mercury Code
1. What does the OBDII code P0C28 mean for a Mercury vehicle?
P0C28 indicates that the electric transmission fluid pump motor is experiencing a low current condition, which can affect transmission performance.
2. What are the common symptoms of code P0C28 in a Mercury?
Symptoms may include transmission overheating, reduced fuel efficiency, poor acceleration, and illumination of the check engine light.
3. What causes the P0C28 code to appear in a Mercury?
Possible causes include a faulty transmission fluid pump motor, wiring issues, a defective control module, or low transmission fluid levels.
4. Can I drive my Mercury with the P0C28 code active?
Driving with this code is not recommended, as it can lead to transmission overheating and potential long-term damage.
5. How do I diagnose the P0C28 code in my Mercury?
Diagnosis involves checking the transmission fluid level, inspecting the pump motor and electrical connections, and using a scan tool to monitor motor current.
6. What repairs can fix the P0C28 code in a Mercury?
Repairs may include replacing the electric transmission fluid pump motor, repairing damaged wiring, or updating/replacing the control module.
7. Is low transmission fluid a possible cause of the P0C28 code?
Yes, low or contaminated transmission fluid can cause the pump motor to draw insufficient current, triggering the code.
8. How much does it typically cost to fix the P0C28 code on a Mercury?
Repair costs can vary depending on the cause but typically range from $200 to $800, depending on parts and labor.
9. Can a software update fix the P0C28 code in a Mercury vehicle?
In some cases, a control module software update from the manufacturer may resolve the issue.
10. What tools are needed to troubleshoot the P0C28 code?
Tools such as an OBDII scan tool, a multimeter, and possibly a transmission fluid pressure tester are typically required for diagnosis.
Discuss the causes and fixes for P0C28 Mercury OBDII Code
Code P0C28 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.