P0BD7 Code - Drive Motor Inverter Temperature Sensor 'D' Circuit Range/Performance
|P0BD7 code possible causes
- Faulty Inverter With Converter Assembly
- Inverter With Converter Assembly harness is open or shorted
- Inverter With Converter Assembly circuit poor electrical connection
- Faulty HV Control ECU
|How is the P0BD7 code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the P0BD7 code
Labor: 1.0The cost to diagnose the P0BD7 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are P0BD7 code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is P0BD7 code meaning?The HV control ECU uses a temperature sensor, which is built into the inverter, to detect the temperature of the motor inverter. The same cooling system that is routed to the MG1 and MG2 cools the inverter. This cooling system is independent from the engine cooling system.
The characteristic of the motor inverter temperature sensor is the same as the boost converter temperature sensor.
The HV control ECU limits the load based on the signals transmitted by the motor inverter temperature sensor, in order to check the effectiveness of the inverter cooling system and prevent the inverter from overheating. Furthermore, the HV control ECU detects a malfunction in the wiring of the motor inverter temperature sensor, as well as in the sensor itself.
|Need more information with the P0BD7 code?Need more information on how to fix the P0BD7 code?
Get Access to Factory Service Manuals