P0BCD LINCOLN Code - Generator Inverter Temperature Sensor 'A' Circuit Range/Performance
Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
|P0BCD LINCOLN code possible causes
- Faulty Generator Inverter Temperature Sensor
- Generator Inverter Temperature Sensor harness is open or shorted
- Generator Inverter Temperature Sensor circuit poor electrical connection
|How is the P0BCD LINCOLN code repair?
Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|P0BCD LINCOLN code tech notes
There is a factory service bulletin for this code.
ISSUE: Some 2013-2014 Fusion and MKZ Hybrid/Energi vehicles may exhibit an illuminated Wrench lamp (Hybrid) or Service Engine Soon lamp (Energi) accompanied by CMDTC P1A18, P1A19, P0AEE or P0BCD.
ACTION: Reprogram the powertrain control module (PCM) to the latest calibration
|What is the cost to diagnose the P0BCD LINCOLN code
Labor: 1.0
The cost to diagnose the P0BCD LINCOLN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are P0BCD LINCOLN code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is P0BCD LINCOLN code meaning?
This code sets when the generator inverter temperature sensor is out of range or indicates a temperature higher than a calibrated threshold.