Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost to diagnose the P0A2C Toyota code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
The resistance of the thermistor, which is enclosed in the motor temperature sensor No. 1, changes in accordance with the changes in the temperature of the motor. The lower the motor temperature, the higher the resistance of the thermistor. Conversely, the higher the temperature, the lower the resistance. The motor temperature sensor No. 1 is connected to the HV control ECU. The power voltage of 5 V is supplied from the MMT terminal of the HV control ECU to the motor temperature sensor No. 1 via resistor R. Because resistor R and the motor temperature sensor No. 1 are connected in series, the resistance changes with the changes in temperature of the motor, which causes the MMT terminal voltage to also change. Based on this signal, the HV control ECU limits the load in order to prevent the motor from overheating. Furthermore, the HV control ECU checks the motor temperature sensor No. 1 for a wiring malfunction and the sensor for malfunction.
Need more information on how to fix the P0A2C Toyota code? Get Access to Factory Service Manuals
Get the P0A2C Toyota code diagnosed by a professional: Find a repair shop in your area