Engine-Codes.com
Engine-Codes – Toyota – P0985 2008 Toyota Camry

P0985 2008 Toyota Camry Code - Shift Solenoid 'E' Control Circuit Low Valve SR

Quick Answer

The P0985 diagnostic trouble code (DTC) in a 2008 Toyota Camry indicates a problem with the Shift Solenoid 'E' Control Circuit Low Valve SR. Common causes include Faulty Shift Solenoid 'E', Wiring or connector issues in the control circuit, Low transmission fluid levels. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0985 2008 Toyota Camry indicates Shift Solenoid 'E' Control Circuit Low Valve SR.
Common causes
Common causes include Faulty Shift Solenoid 'E', Wiring or connector issues in the control circuit, Low transmission fluid levels.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0985 2008 Toyota Camry Description

The P0985 diagnostic trouble code (DTC) in a 2008 Toyota Camry indicates a problem with the Shift Solenoid 'E' Control Circuit Low Valve SR. This code specifically points to an issue with the electrical circuit that controls the operation of the Shift Solenoid 'E', which is responsible for regulating the flow of transmission fluid to engage a specific gear. When this circuit is detected to be operating at a lower voltage than expected, it can lead to improper shifting patterns, transmission slippage, and overall poor performance of the vehicle.

OBDII Code P0985 2008 Toyota Camry - Shift Solenoid 'E' Control Circuit Low Valve SR
P0985 2008 Toyota Camry Code - Shift Solenoid 'E' Control Circuit Low Valve SR

Common Causes of P0985 2008 Toyota Camry

  1. Faulty Shift Solenoid 'E'
  2. Wiring or connector issues in the control circuit
  3. Low transmission fluid levels
  4. Internal transmission damage
  5. ECM (Engine Control Module) malfunction

Symptoms of P0985 2008 Toyota Camry

  1. Delayed or harsh shifting between gears
  2. Transmission slipping or jerking during acceleration
  3. Illumination of the Check Engine Light
  4. Reduced fuel efficiency
  5. Inability to shift into certain gears

How to Fix P0985 2008 Toyota Camry

  1. Begin by conducting a thorough inspection of the wiring and connectors associated with the Shift Solenoid 'E' Control Circuit. Look for any signs of damage, corrosion, or loose connections. Repair or replace any faulty components as needed.
  2. Check the transmission fluid level and condition. Top up the fluid if necessary and address any leaks that may be causing low levels.
  3. Test the Shift Solenoid 'E' for proper operation using a multimeter. Replace the solenoid if it fails the test.
  4. If the solenoid and wiring are in good condition, consider checking the ECM for any potential faults. Consult a professional if necessary for further diagnosis and repair.
  5. Clear the DTC from the vehicle's memory using a diagnostic scanner after completing the repairs and test drive the vehicle to ensure that the issue has been resolved.

Cost to Fix P0985 2008 Toyota Camry

The cost of repairing a Shift Solenoid 'E' Control Circuit Low Valve SR issue in a 2008 Toyota Camry can vary depending on the extent of the problem and the specific components that require replacement. On average, the cost of parts for this repair can range from $100 to $300, while labor costs can range from $150 to $400. Overall, the total repair cost could fall between $250 and $700. It is important to note that these estimates are approximate and actual costs may vary based on factors such as location, labor rates, and the availability of parts. It is recommended to obtain quotes from local auto repair shops for a more accurate cost estimate.

When is the Code Detected?

Engine Control Module (ECM) detectes an open or shorted condition on the solenoid circuit

Need more information about the P0985 2008 Toyota Camry code?

Need more information on how to fix the P0985 2008 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0985 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0985 2008 Toyota Camry Code

1. What does the OBDII code P0985 mean for a 2008 Toyota Camry?

P0985 indicates an issue with the Shift Solenoid 'E' Control Circuit, specifically that the circuit voltage is lower than expected.

2. What are the common symptoms of code P0985 in a 2008 Toyota Camry?

Symptoms may include harsh or delayed shifting, transmission stuck in a single gear, reduced fuel efficiency, and the Check Engine Light illuminating.

3. What causes the P0985 code to appear in a 2008 Toyota Camry?

Common causes include a faulty shift solenoid 'E,' damaged or corroded wiring, a malfunctioning transmission control module (TCM), or low transmission fluid.

4. Can driving with the P0985 code damage my 2008 Toyota Camry?

Yes, continuing to drive with this code can lead to further transmission damage or unsafe driving conditions due to erratic shifting.

5. How can I diagnose the P0985 code in my 2008 Toyota Camry?

Use an OBDII scanner to confirm the code, then inspect the shift solenoid 'E,' wiring harness, and connectors for damage or corrosion. Check the transmission fluid level and condition.

6. How do I fix the P0985 code in a 2008 Toyota Camry?

Repairs may involve replacing the shift solenoid 'E,' repairing or replacing damaged wiring, cleaning corroded connectors, or refilling or replacing transmission fluid.

7. How much does it cost to repair the P0985 code on a 2008 Toyota Camry?

The cost varies, but replacing a shift solenoid can range from $150 to $400, while wiring repairs could cost $50 to $200 depending on the extent of damage.

8. Can low transmission fluid cause the P0985 code?

Yes, low or degraded transmission fluid can cause improper solenoid operation, leading to the P0985 code.

9. Is it safe to reset the P0985 code without repairs?

Resetting the code without addressing the underlying issue is not recommended, as the problem may persist and cause further damage.

10. Do I need a mechanic to fix the P0985 code in my 2008 Toyota Camry?

While minor issues like low transmission fluid can be resolved at home, diagnosing and repairing wiring or solenoids may require professional expertise.

Discuss the causes and fixes for P0985 2008 Toyota Camry OBDII Code

Submit a New Comment

Code P0985 2008 Toyota Camry comments

No comments found for this page.