P0982 ACURA Possible Causes
- Faulty Shift Solenoid Valve 'D'
- Shift Solenoid Valve 'D' harness is open or shorted
- Shift Solenoid Valve 'D' circuit poor electrical connection
How do I fix code P0982 ACURACheck the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0982 ACURA code
Labor: 1.0The cost of diagnosing the P0982 ACURA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P0982 ACURA MeaningWhen shift solenoid valves A, B, C, D, and E are turned ON, the hydraulic pressure circuit opens. The hydraulic pressure circuit supplies/discharges hydraulic pressure to/from each clutch according to the combination of the ON/OFF status of the shift solenoid valves. The Powertrain Control Module (PCM) commands the driver circuit to turn on the shift solenoid valve. The circuit diagnoses malfunctions such as a circuit short or open, and sends back a return signal during the PCM's command. When the return signal does not match the PCM command to turn ON the shift solenoid valve, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).
P0982 ACURA More InformationNeed more information on how to fix the P0982 ACURA code?
Get Access to Factory Service Manuals