P0980 Acura Code - Shift Solenoid Valve 'C' Open
Quick Answer
The P0980 code for Acura vehicles indicates a problem with the Shift Solenoid Valve 'C' being open. Common causes include Faulty shift solenoid valve 'C', Electrical issues such as wiring problems or a faulty transmission control module, Mechanical failures within the transmission system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0980 Acura indicates Shift Solenoid Valve 'C' Open.
- Common causes
- Common causes include Faulty shift solenoid valve 'C', Electrical issues such as wiring problems or a faulty transmission control module, Mechanical failures within the transmission system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0980 Acura Description
The P0980 code for Acura vehicles indicates a problem with the Shift Solenoid Valve 'C' being open. The shift solenoid valve is a crucial component of the transmission system, responsible for regulating the flow of transmission fluid to control gear shifting. When the solenoid valve 'C' is stuck open, it can disrupt the transmission's ability to shift gears smoothly and efficiently.
Common Causes of P0980 Acura
- Faulty shift solenoid valve 'C'
- Electrical issues such as wiring problems or a faulty transmission control module
- Mechanical failures within the transmission system
- Blockages in the transmission fluid passages
- Low transmission fluid levels or contaminated fluid
Symptoms of P0980 Acura
- Erratic shifting patterns
- Delayed gear changes
- Harsh shifting
- Inability to shift gears
How to Fix P0980 Acura
- Begin by conducting a thorough diagnostic scan to confirm the P0980 code and identify the specific issue with the shift solenoid valve 'C'.
- Inspect the electrical connections and wiring related to the shift solenoid valve to ensure they are intact and functioning properly.
- Check the transmission fluid level and quality, topping up or replacing the fluid if necessary.
- If the shift solenoid valve 'C' is determined to be faulty, it will need to be replaced with a new one.
- Clear the diagnostic trouble codes, test drive the vehicle to ensure proper shifting, and re-scan to confirm the issue has been resolved.
Cost to Fix P0980 Acura
The typical repair costs for addressing a shift solenoid valve 'C' open issue can range from $200 to $500, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check local rates for a more precise estimate. Keep in mind that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less.
Need more information about the P0980 Acura code?
Need more information on how to fix the P0980 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0980 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0980 Acura Code
What does the OBDII code P0980 mean for an Acura?
P0980 indicates that there is an open circuit or issue with Shift Solenoid Valve 'C', which helps regulate transmission fluid flow for proper gear shifting.
What are common symptoms of code P0980 in an Acura?
Symptoms include rough or delayed shifting, transmission slippage, failure to engage certain gears, and the activation of the Check Engine Light.
What causes the P0980 code to appear on an Acura?
Common causes include a faulty shift solenoid valve, damaged wiring or connections, low transmission fluid, or internal transmission issues.
Can low transmission fluid cause the P0980 code in an Acura?
Yes, insufficient transmission fluid can cause improper solenoid operation and trigger the P0980 code.
How can I diagnose the P0980 code on my Acura?
Start by inspecting wiring and connectors for damage, check transmission fluid level and condition, and test the shift solenoid valve for proper function.
Is it safe to drive with the P0980 code active on an Acura?
Driving with this code is not recommended, as it can lead to further transmission damage or unsafe driving conditions due to improper gear shifting.
How much does it cost to fix the P0980 code on an Acura?
Repair costs vary depending on the issue but can range from $150 to $500 for solenoid replacement, or higher if internal transmission repairs are needed.
Can I fix the P0980 code myself on an Acura?
If you have mechanical experience, you may be able to replace a faulty solenoid or repair damaged wiring, but more complex issues may require professional assistance.
What tools are needed to troubleshoot the P0980 code on an Acura?
Basic tools include a diagnostic scanner to read the code, a multimeter to test circuits, and standard automotive hand tools for solenoid inspection or replacement.
How do I clear the P0980 code after repairs on my Acura?
After completing repairs, use an OBDII scanner to clear the code. If the underlying issue is fixed, the code should not return.
Discuss the causes and fixes for P0980 Acura OBDII Code
Code P0980 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.