P0974 2014 GMC Sierra Code - Shift Solenoid Valve 1 Control Circuit High Voltage
Quick Answer
The P0974 diagnostic trouble code (DTC) on a 2014 GMC Sierra indicates an issue with the Shift Solenoid Valve 1 Control Circuit, specifically a high voltage condition. Common causes include Faulty Shift Solenoid Valve 1, Damaged wiring or connectors in the control circuit, Malfunctioning Transmission Control Module (TCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0974 2014 GMC Sierra indicates Shift Solenoid Valve 1 Control Circuit High Voltage.
- Common causes
- Common causes include Faulty Shift Solenoid Valve 1, Damaged wiring or connectors in the control circuit, Malfunctioning Transmission Control Module (TCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0974 2014 GMC Sierra Description
The P0974 diagnostic trouble code (DTC) on a 2014 GMC Sierra indicates an issue with the Shift Solenoid Valve 1 Control Circuit, specifically a high voltage condition. The shift solenoid valve is responsible for controlling the flow of transmission fluid to engage or disengage specific gears within the transmission. In this case, a high voltage in the control circuit suggests that there is an electrical fault affecting the operation of the solenoid valve.
Common Causes of P0974 2014 GMC Sierra
- Faulty Shift Solenoid Valve 1
- Damaged wiring or connectors in the control circuit
- Malfunctioning Transmission Control Module (TCM)
- Electrical issues such as a short circuit or faulty power supply
- Corrosion or poor connections in the transmission system
Symptoms of P0974 2014 GMC Sierra
- Harsh or delayed shifting between gears
- Transmission slipping
- Erratic or unpredictable transmission behavior
- Illumination of the Check Engine Light
- Reduced fuel efficiency due to inefficient gear changes
How to Fix P0974 2014 GMC Sierra
- Use a scan tool to retrieve the trouble codes and verify the presence of code P0974.
- Inspect the wiring and connectors in the Shift Solenoid Valve 1 Control Circuit for any damage or corrosion. Repair or replace as necessary.
- Test the Shift Solenoid Valve 1 for proper operation and replace if found to be faulty.
- Check the Transmission Control Module (TCM) for any signs of damage or malfunction. Repair or replace as needed.
- Clear the trouble codes, perform a test drive to ensure proper shifting, and recheck for any stored codes.
Cost to Fix P0974 2014 GMC Sierra
The cost of repairing a P0974 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, the parts required for this repair, such as a new Shift Solenoid Valve 1 or Transmission Control Module, can range from $100 to $300 or more. Labor costs at an auto repair shop typically range from $80 to $150 per hour, and the total repair cost could amount to several hundred dollars. It is advisable to consult with a professional mechanic to get an accurate estimate based on your vehicle's specific condition and needs.
Need more information about the P0974 2014 GMC Sierra code?
Need more information on how to fix the P0974 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0974 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0974 2014 GMC Sierra Code
What are the common symptoms of OBDII code P0974 in a 2014 GMC Sierra?
Common symptoms include harsh shifting, transmission slipping, decreased fuel efficiency, and the transmission going into limp mode.
What are the possible causes of OBDII code P0974 in a 2014 GMC Sierra?
Possible causes include a faulty shift solenoid valve 1, damaged wiring or connectors in the shift solenoid circuit, low transmission fluid level, or a malfunctioning transmission control module.
How can I diagnose OBDII code P0974 in a 2014 GMC Sierra?
Diagnosis typically involves using a scan tool to check for the specific trouble code, inspecting the shift solenoid valve 1 and its wiring for any damage, and testing the transmission fluid level and quality.
What are some repair tips for fixing OBDII code P0974 in a 2014 GMC Sierra?
Repair tips may include replacing the shift solenoid valve 1 if it is found to be faulty, repairing any damaged wiring or connectors in the circuit, ensuring the transmission fluid level is correct, and resetting the trouble codes after repairs are completed.
Is it safe to continue driving a 2014 GMC Sierra with OBDII code P0974?
It is not recommended to continue driving with this code present, as it can lead to further damage to the transmission. It is best to diagnose and repair the issue as soon as possible.
Can I fix OBDII code P0974 in a 2014 GMC Sierra by simply clearing the code?
Clearing the trouble code may temporarily turn off the check engine light, but it will not fix the underlying issue causing the code. It is important to diagnose and repair the problem to prevent further issues.
How much does it typically cost to repair OBDII code P0974 in a 2014 GMC Sierra?
The cost of repairs can vary depending on the specific cause of the code and the labor rates in your area. It is recommended to get a diagnostic from a qualified mechanic to determine the exact cost.
Are there any recalls or technical service bulletins related to OBDII code P0974 in a 2014 GMC Sierra?
It is advisable to check with your local GMC dealership or online resources for any recalls or technical service bulletins related to this specific OBDII code in your vehicle.
What should I do if OBDII code P0974 keeps coming back in my 2014 GMC Sierra after repairs?
If the code keeps coming back after repairs, it may indicate that the underlying issue has not been fully resolved. It is recommended to recheck the repairs, ensure proper installation of components, and consider seeking further diagnosis from a professional mechanic.
Discuss the causes and fixes for P0974 2014 GMC Sierra OBDII Code
Code P0974 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.