|How is the P0972 DODGE code repair?
Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the P0972 DODGE code
The cost to diagnose the P0972 DODGE code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What is P0972 DODGE code meaning?
A/T clutch pressure control solenoid valve C is used for clutch pressure control. A spool in A/T clutch pressure control solenoid valve C pushes the valve according to the duty cycle that is controlled by the Powertrain Control Module (PCM
) (The hydraulic pressure is proportional to the current). The PCM
measures the current flowing through A/T clutch pressure control solenoid valve C and uses feedback control to compensate for the difference between the actual current and the commanded one. If the measured current for the PCM
output duty cycle is not within a specified range (circuit short or open), the PCM
detects a malfunction and stores a Diagnostic Trouble Code (DTC).