Engine-Codes - Generic - P0969

P0969 Code - Pressure Control Solenoid Valve 3 Performance

- Code Popularity: 7,849 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents

What are the Possible Causes of the Code P0969?

  • Low transmission fluid
  • Faulty Control Solenoid Valve Assembly
  • Control Solenoid Valve Assembly harness is open or shorted
  • Control Solenoid Valve Assembly circuit poor electrical connection

How to Fix the P0969 Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

What is the Cost to Diagnose the Code P0969?

Labor: 1.0

The cost to diagnose the P0969 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your Car have Safety Recalls? → Check here

What are Code P0969 Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

What Does the P0969 Code Mean?

The pressure control solenoid 3 is part of the control solenoid valve assembly which has no serviceable parts. The normally high-pressure control solenoid 3 regulates and directs the pressure control solenoid 3 oil pressure to the 4-5-6 clutch regulator valve and 4-5-6 clutch boost valve. Increasing pressure control solenoid 3 oil pressure increases oil pressure to the 4-5-6 clutch assembly. The Transmission Control Module (TCM) varies the current to the pressure control solenoid 3 through a low side driver. Decreasing the current to the pressure control solenoid 3 increases pressure control solenoid 3 oil pressure by closing OFF the solenoid exhaust port. Increasing the current to the pressure control solenoid 3 decreases pressure control solenoid 3 oil pressure by opening the solenoid exhaust port. Pressure control solenoid 3 power is supplied by the Transmission Control Module through a high side driver. The high-side driver protects the circuit and components from excessive current flow. If excessive current flow is detected, the high side driver will turn OFF. When the fault is corrected the high-side driver will reset.
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module detects an internal electrical malfunction on the pressure control solenoid 3 control circuit where the measured pressure control solenoid 3 current does not equal the commanded clutch pressure control solenoid 3 current for 5 s.

P0969 Code - Pressure Control Solenoid Valve 3 Performance

Need more Information on the P0969 Code?

Need more information on how to fix the P0969 code? Get Access to Factory Service Manuals

Code P0969 Information for Specific Makes

Need Help with the P0969 Code?

Get the P0969 code diagnosed by a professional: Find a repair shop in your area