P0966 2017 Honda CR-V Code - CVT Driven Pulley Pressure Control Valve Circuit Low
Quick Answer
The P0966 code on a 2017 Honda CR-V indicates a problem with the CVT (Continuously Variable Transmission) Driven Pulley Pressure Control Valve Circuit being low. Common causes include Faulty CVT Driven Pulley Pressure Control Valve, Wiring or connector issues in the circuit, Malfunctioning transmission control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0966 2017 Honda CR-V indicates CVT Driven Pulley Pressure Control Valve Circuit Low.
- Common causes
- Common causes include Faulty CVT Driven Pulley Pressure Control Valve, Wiring or connector issues in the circuit, Malfunctioning transmission control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0966 2017 Honda CR-V Description
The P0966 code on a 2017 Honda CR-V indicates a problem with the CVT (Continuously Variable Transmission) Driven Pulley Pressure Control Valve Circuit being low. In a CVT system, the pulley pressure control valve is responsible for regulating the hydraulic pressure that controls the movement of the pulleys, which in turn affects the gear ratio of the transmission. When this circuit is reading a low voltage or signal, it can lead to issues with the transmission's performance.
Common Causes of P0966 2017 Honda CR-V
- Faulty CVT Driven Pulley Pressure Control Valve
- Wiring or connector issues in the circuit
- Malfunctioning transmission control module
- Low transmission fluid levels
- Electrical system issues
Symptoms of P0966 2017 Honda CR-V
- Erratic shifting behavior
- Slipping gears
- Decreased fuel efficiency
- Transmission overheating
- Illumination of the Check Engine Light
How to Fix P0966 2017 Honda CR-V
- Begin by conducting a thorough inspection of the CVT Driven Pulley Pressure Control Valve and its circuitry.
- Test the pressure control valve for proper operation and replace if necessary.
- Check the wiring and connectors for any damage or corrosion, repairing or replacing as needed.
- Scan the transmission control module for any fault codes and address any issues found.
- Refill or top up the transmission fluid to the correct level if it is low.
Cost to Fix P0966 2017 Honda CR-V
The typical repair costs for addressing a P0966 code on a 2017 Honda CR-V can vary depending on the specific cause of the issue. In general, parts for this repair could range from $100 to $300, while labor costs could range from $150 to $400. Overall, the total cost of repairs for this code could fall within the range of $250 to $700. It's important to note that these estimates are rough averages and actual costs may vary based on factors such as location, labor rates, and the extent of the repairs needed. It's recommended to consult with a qualified mechanic or repair shop for a more accurate cost estimate.
Need more information about the P0966 2017 Honda CR-V code?
Need more information on how to fix the P0966 2017 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0966 2017 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0966 2017 Honda CR-V Code
What does the OBDII code P0966 mean on a 2017 Honda CR-V?
1. The P0966 code indicates a low voltage issue in the CVT driven pulley pressure control valve circuit, which regulates hydraulic pressure in the transmission. 2.
What are the common symptoms of code P0966 in a 2017 Honda CR-V?
Symptoms may include poor acceleration, harsh or delayed shifting, transmission slipping, or the vehicle entering limp mode. 3.
What causes the P0966 code to appear?
Common causes include a faulty CVT pressure control solenoid, wiring issues like damaged or corroded connectors, or low transmission fluid levels. 4.
Can low transmission fluid cause the P0966 code?
Yes, low or contaminated transmission fluid can lead to inadequate hydraulic pressure, triggering the P0966 code. 5.
How is the P0966 code diagnosed?
A mechanic will check the transmission fluid level, inspect wiring and connections to the pressure control solenoid, and perform electrical tests on the solenoid circuit. 6.
Can driving with the P0966 code damage my 2017 Honda CR-V?
Yes, driving with this code can cause further transmission damage if the hydraulic pressure is not properly regulated. Immediate diagnosis and repair are recommended. 7.
How can I fix the P0966 code on my 2017 Honda CR-V?
Repairs may include replacing the pressure control solenoid, repairing damaged wiring, cleaning corroded connectors, or flushing and refilling the transmission fluid. 8.
Is the P0966 code specific to Honda vehicles?
No, P0966 is a generic OBDII code, but its specific meaning and troubleshooting steps may vary by vehicle make and model. 9.
How much does it cost to repair the P0966 code on a 2017 Honda CR-V?
Repair costs depend on the issue but typically range from $150 to $500, including parts and labor. 10.
Can a faulty pressure control solenoid alone cause the P0966 code?
Yes, a malfunctioning solenoid can directly cause the code by failing to maintain proper hydraulic pressure in the CVT.
Discuss the causes and fixes for P0966 2017 Honda CR-V OBDII Code
Code P0966 2017 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.