P0962 FORD - Pressure Control Solenoid 'A' Control Circuit Low
P0962 FORD Possible Causes
- Faulty Pressure Control Solenoid 'A'
- Pressure Control Solenoid 'A' harness is open or shorted
- Pressure Control Solenoid 'A' circuit poor electrical connection
First diagnose P0962 FORD code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the P0962 FORD code
Labor: 1.0The cost of diagnosing the P0962 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
P0962 FORD Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0962 FORD MeaningThe Pressure Control (PC) Solenoid Valve an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. As current flow is increased, the magnetic field produced by the coil moves the solenoid’s plunger further away from the exhaust port. Opening the exhaust port decreases the output fluid pressure regulated by the PC solenoid valve, which ultimately decreases line pressure. The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the Transmission Control Module (TCM).
P0962 FORD More InformationNeed more information on how to fix the P0962 FORD code?
Get Access to Factory Service Manuals