P0962 ACURA Possible Causes
- Faulty Clutch Pressure Control Solenoid Valve 'A'
- Clutch Pressure Control Solenoid Valve 'A' harness is open or shorted
- Clutch Pressure Control Solenoid Valve 'A' circuit poor electrical connection
How do I fix code P0962 ACURACheck the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0962 ACURA code
Labor: 1.0The cost of diagnosing the P0962 ACURA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P0962 ACURA MeaningA/T clutch pressure control solenoid valve A is used for clutch pressure control. A spool in A/T clutch pressure control solenoid valve A pushes the valve according to the duty cycle that is controlled by the Powertrain Control Module (PCM) (The hydraulic pressure is proportional to the current). The PCM measures the current flowing through A/T clutch pressure control solenoid valve A, and uses feedback control to compensate for the difference between the actual current and the commanded one. If the measured current for the PCM output duty cycle is not within a specified range (open or short), the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).
P0962 ACURA More InformationNeed more information on how to fix the P0962 ACURA code?
Get Access to Factory Service Manuals