P092D Code - Gear Shift Lock Solenoid/Actuator Control Circuit 'B' High
Quick Answer
The diagnostic trouble code P092D indicates an issue with the Gear Shift Lock Solenoid/Actuator Control Circuit 'B' being too high. Common causes include Faulty gear shift lock solenoid/actuator, Wiring issues such as a short or open circuit, Malfunctioning brake switch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P092D indicates Gear Shift Lock Solenoid/Actuator Control Circuit 'B' High.
- Common causes
- Common causes include Faulty gear shift lock solenoid/actuator, Wiring issues such as a short or open circuit, Malfunctioning brake switch.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P092D Description
The diagnostic trouble code P092D indicates an issue with the Gear Shift Lock Solenoid/Actuator Control Circuit 'B' being too high. This code is typically found in vehicles with automatic transmissions and is related to the system that prevents the gear shifter from being moved out of the "Park" position without the brake pedal being pressed. The gear shift lock solenoid/actuator is responsible for releasing the lock when the brake pedal is engaged, allowing the driver to shift into a different gear.
Common Causes of P092D
- Faulty gear shift lock solenoid/actuator.
- Wiring issues such as a short or open circuit.
- Malfunctioning brake switch.
- Problem with the vehicle's control module.
- Corrosion or damage to electrical connections.
Symptoms of P092D
- Inability to shift out of "Park" without pressing the brake pedal.
- Difficulty shifting gears.
- Illumination of the "Shift Lock" warning light on the dashboard.
- Strange noises coming from the gear shift area.
- Transmission slipping or jerking when shifting gears.
How to Fix P092D
- Diagnose the issue by checking the gear shift lock solenoid/actuator, wiring, brake switch, and control module for any faults.
- Replace the faulty gear shift lock solenoid/actuator if necessary.
- Repair any damaged wiring or connections.
- Reset the vehicle's computer system to clear the trouble code.
- Test the gear shift lock system to ensure proper operation.
Cost to Fix P092D
The cost of repairing a Gear Shift Lock Solenoid/Actuator Control Circuit 'B' High issue can vary depending on the specific cause of the problem and the make and model of the vehicle. On average, the parts for this repair can range from $50 to $200, while the labor costs can range from $100 to $300. Overall, the total repair cost could be anywhere from $150 to $500. It's important to note that these are rough estimates, and actual costs may vary based on the factors mentioned earlier. It's recommended to consult with a professional mechanic for a more accurate cost estimate.
Need more information about the P092D code?
Need more information on how to fix the P092D code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P092D code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P092D Code
1. What does the OBDII code P092D mean?
P092D indicates a problem with the Gear Shift Lock Solenoid/Actuator Control Circuit 'B', specifically that the voltage is higher than expected.
2. What are the common symptoms of a P092D code?
Symptoms may include difficulty shifting gears, the shift lever being stuck, the inability to shift out of park, or a lit check engine light.
3. What causes the P092D code to appear?
Common causes include a faulty gear shift lock solenoid, damaged wiring or connectors in the control circuit, a blown fuse, or an issue with the transmission control module (TCM).
4. Can I drive my car with a P092D code?
Driving with a P092D code may be difficult or unsafe, especially if the gear shift lock prevents proper gear changes. It’s best to address the issue promptly.
5. How do I diagnose the P092D code?
Diagnosis involves checking the gear shift lock solenoid for proper operation, inspecting the circuit wiring and connectors for damage, and testing for correct voltage levels at the solenoid.
6. How do I fix a P092D code?
Repairs may include replacing the faulty gear shift lock solenoid, repairing damaged wiring, replacing a blown fuse, or reprogramming or replacing the transmission control module if necessary.
7. How much does it cost to fix a P092D code?
Costs vary depending on the cause. Replacing a solenoid typically costs $150–$300, while wiring repairs or TCM replacement may cost more.
8. Can a blown fuse cause the P092D code?
Yes, a blown fuse in the gear shift lock solenoid circuit can lead to a high voltage condition and trigger the P092D code.
9. Is the P092D code related to the transmission?
Yes, the code is tied to the transmission system, specifically the gear shift lock mechanism, which ensures safe operation.
10. Will clearing the code fix the P092D issue?
Clearing the code without addressing the root cause will not fix the issue, and the code is likely to return. Proper diagnosis and repair are necessary.
Discuss the causes and fixes for P092D OBDII Code
Code P092D comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.