P0902 Dodge Code - Clutch Actuator Circuit Low
Quick Answer
The P0902 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the clutch actuator circuit being detected as low. Common causes include Faulty wiring or connectors in the clutch actuator circuit, Malfunctioning clutch actuator, Issues with the transmission control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0902 Dodge indicates Clutch Actuator Circuit Low.
- Common causes
- Common causes include Faulty wiring or connectors in the clutch actuator circuit, Malfunctioning clutch actuator, Issues with the transmission control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0902 Dodge Description
The P0902 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the clutch actuator circuit being detected as low. The clutch actuator is a component of the vehicle's automated manual transmission system, responsible for engaging and disengaging the clutch as needed during gear changes. When the circuit is detected as low, it means that the voltage in the circuit is lower than the expected value, indicating a potential issue with the electrical connection or components involved in the clutch actuation process.
Common Causes of P0902 Dodge
- Faulty wiring or connectors in the clutch actuator circuit
- Malfunctioning clutch actuator
- Issues with the transmission control module
- Electrical issues such as a blown fuse or short circuit
- Wear and tear on clutch actuator components
Symptoms of P0902 Dodge
- Difficulty shifting gears
- Rough or jerky gear changes
- Clutch slippage
- Transmission slipping
- Illumination of the check engine light
How to Fix P0902 Dodge
- Perform a thorough diagnosis using a scan tool to pinpoint the exact cause of the low clutch actuator circuit.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as necessary.
- Test the clutch actuator to determine if it is functioning correctly, replacing it if found to be faulty.
- Check the transmission control module for any faults or errors, resetting or replacing as needed.
- Clear the DTCs and perform a test drive to ensure the issue has been resolved.
Cost to Fix P0902 Dodge
The cost of repairing a low clutch actuator circuit can vary depending on the specific cause of the issue and the extent of the repair needed. On average, the repair cost for this type of issue can range from $200 to $500, including parts and labor. However, it's important to note that labor rates and parts prices can vary significantly based on factors such as location, vehicle make and model, and the specific repair shop. It's advisable to consult with a trusted mechanic or repair shop for a more accurate estimate based on your vehicle's specific needs.
Need more information about the P0902 Dodge code?
Need more information on how to fix the P0902 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0902 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0902 Dodge Code
1. What does the OBDII code P0902 mean on a Dodge vehicle?
P0902 indicates that the Powertrain Control Module (PCM) has detected a low voltage or malfunction in the clutch actuator circuit.
2. What are the common symptoms of a P0902 code on a Dodge?
Symptoms may include difficulty shifting gears, the transmission stuck in a specific gear, reduced engine performance, or the illumination of the Check Engine Light.
3. What causes the P0902 Clutch Actuator Circuit Low code on a Dodge?
Common causes include a faulty clutch actuator, damaged wiring or connectors in the actuator circuit, a malfunctioning PCM, or a weak battery or charging system issue.
4. Can I drive my Dodge with a P0902 code?
It is not recommended to drive with a P0902 code, as it may cause shifting problems or further damage to the transmission system.
5. How do I diagnose the P0902 code on my Dodge?
Diagnose the code by inspecting the wiring and connectors in the clutch actuator circuit for damage, testing the clutch actuator for proper function, and checking the battery voltage and PCM for issues.
6. How can I fix the P0902 code on a Dodge?
Repairs may involve replacing the clutch actuator, repairing damaged wiring or connectors, ensuring proper battery voltage, or reprogramming/replacing the PCM if necessary.
7. How much does it cost to repair a P0902 code on a Dodge?
Repair costs vary but may range from $100 to $500 depending on whether the issue is related to wiring, the clutch actuator, or the PCM.
8. Can a weak battery cause the P0902 code on a Dodge?
Yes, a weak or failing battery can cause low voltage in the clutch actuator circuit, triggering the P0902 code.
9. Does the P0902 code always mean the clutch actuator is faulty?
No, the code can also be caused by wiring issues, a malfunctioning PCM, or insufficient power supply to the circuit.
10. Is the P0902 code specific to manual transmissions on Dodge vehicles?
Yes, this code typically applies to vehicles with manual or automated manual transmissions that use a clutch actuator system.
Discuss the causes and fixes for P0902 Dodge OBDII Code
Code P0902 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.