P0885 Jeep Code - TCM Power Relay Control Circuit/Open
Quick Answer
The P0885 diagnostic trouble code (DTC) for Jeep vehicles refers to a malfunction in the Transmission Control Module (TCM) power relay control circuit, indicating an open connection. Common causes include Faulty TCM power relay, Corrosion or loose connections in the relay circuit, Wiring harness damage or short circuits. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0885 Jeep indicates TCM Power Relay Control Circuit/Open.
- Common causes
- Common causes include Faulty TCM power relay, Corrosion or loose connections in the relay circuit, Wiring harness damage or short circuits.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0885 Jeep Description
The P0885 diagnostic trouble code (DTC) for Jeep vehicles refers to a malfunction in the Transmission Control Module (TCM) power relay control circuit, indicating an open connection. The TCM is responsible for controlling the vehicle's transmission functions, such as shifting gears and ensuring smooth operation. When the power relay control circuit is open, it means that the TCM is not receiving the necessary power supply, which can lead to a variety of transmission-related issues. This can result in the transmission not functioning properly, causing erratic shifting, poor performance, and potential damage to the transmission components.
Common Causes of P0885 Jeep
- Faulty TCM power relay
- Corrosion or loose connections in the relay circuit
- Wiring harness damage or short circuits
- Defective TCM module
- Electrical issues in the vehicle's power supply system
Symptoms of P0885 Jeep
- Illumination of the Check Engine Light on the dashboard
- Transmission slipping or delayed shifting
- Harsh or erratic gear changes
- Reduced fuel efficiency
- Transmission staying in one gear or failing to shift
How to Fix P0885 Jeep
- Begin by diagnosing the specific cause of the open circuit using a digital multimeter to test the relay, wiring, and connections.
- Replace the faulty TCM power relay if it is determined to be the cause of the issue.
- Inspect and repair any damaged or corroded wiring harnesses or connections in the relay circuit.
- If the TCM module is found to be defective, it may need to be replaced and reprogrammed.
- Clear the DTC from the vehicle's memory using an OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0885 Jeep
The cost of repairing a P0885 code in a Jeep can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay between $150 to $400 for parts and labor. Keep in mind that diagnostic time and labor rates can fluctuate, so it's recommended to obtain quotes from local auto repair shops for a more accurate estimate. Additionally, if the TCM module needs to be replaced, the cost may be higher due to the cost of the part and any necessary reprogramming.
Need more information about the P0885 Jeep code?
Need more information on how to fix the P0885 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0885 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0885 Jeep Code
1. What does the OBDII code P0885 mean on a Jeep?
P0885 indicates an issue with the TCM (Transmission Control Module) Power Relay Control Circuit, specifically an open or malfunction in the circuit.
2. What are the common symptoms of the P0885 code?
Symptoms may include the transmission entering limp mode, harsh shifting, failure to shift gears, or an illuminated check engine light.
3. What causes the P0885 code on a Jeep?
Common causes include a faulty TCM power relay, damaged wiring or connectors in the relay circuit, a blown fuse, or a malfunctioning TCM.
4. How can I diagnose the P0885 code?
Start by checking the TCM power relay, inspecting the wiring and connectors for damage, and testing the relay circuit for continuity. A professional scan tool can also help verify the issue.
5. Can I drive my Jeep with the P0885 code?
Driving with the P0885 code is not recommended, as the transmission may operate in limp mode, which can lead to reduced performance and potential damage over time.
6. How do I fix the P0885 code on my Jeep?
Repairs may involve replacing a faulty TCM power relay, repairing or replacing damaged wiring, replacing blown fuses, or, in rare cases, replacing the TCM itself.
7. How much does it cost to repair the P0885 code?
The cost varies depending on the cause. Replacing a TCM power relay may cost $20–$50, while wiring repairs or TCM replacement can cost significantly more.
8. Can a dead battery cause the P0885 code?
Yes, a weak or dead battery can sometimes cause electrical issues, including triggering the P0885 code. Check the battery and charging system as part of the diagnosis.
9. What tools are needed to troubleshoot the P0885 code?
Basic tools include a multimeter for continuity checks, a relay tester, and an OBDII scanner to read and clear codes.
10. Is the P0885 code specific to Jeeps?
No, the P0885 code can appear in other vehicles, but the repair steps and symptoms may vary slightly depending on the make and model.
Discuss the causes and fixes for P0885 Jeep OBDII Code
Code P0885 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.