P0885 HYUNDAI - A/T Control Relay Malfunction
P0885 HYUNDAI Possible Causes
- Faulty Transmission Control Relay
- Transmission Control Relay harness is open or shorted
- Transmission Control Relay circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How is the P0885 HYUNDAI code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the P0885 HYUNDAI code
Labor: 1.0The cost to diagnose the P0885 HYUNDAI code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
- Engine Light ON (or Service Engine Soon Warning Light)
P0885 HYUNDAI MeaningThe Hyundai Integrated Vehicle Electronic Control (HIVEC) Automatic Transmission supplies the power to the solenoid valves by way of a control relay. When the Transmission Control Module (TCM) sets the relay to ON, the relay operates, and the battery power is supplied to all the solenoid valves. When the TCM sets the relay to OFF, all solenoid valve power is shut off and the transmission is held in the 3rd gear position. The TCM checks the A/T control relay signal by monitoring the control signal. If, after the ignition key is turned on, an unexpected voltage value, which is quite a bit lower than battery voltage is detected, the TCM sets this code.
More InformationNeed more information on how to fix the P0885 HYUNDAI code?
Get Access to Factory Service Manuals