Engine-Codes - Buick - P0873 Buick

P0873 Buick Code - Transmission Fluid Pressure Switch 3 Circuit High Voltage

- Code Popularity: 200 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents

|What are the Possible Causes of the Code P0873 Buick?

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty Transmission Control Solenoid Valve Assembly
  • Transmission Control Solenoid Valve Assembly harness is open or shorted
  • Transmission Control Solenoid Valve Assembly circuit poor electrical connection
  • Faulty Transmission Control Module (TCM)

|How to Fix the P0873 Buick Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|What is the Cost to Diagnose the Code P0873 Buick?

Labor: 1.0

The cost to diagnose the P0873 Buick code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your Buick have Safety Recalls? → Check here

|What are Code P0873 Buick Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|What Does the P0873 Buick Code Mean?

The transmission fluid pressure switch, also known as the pressure switch manifold, is a multiple switch assembly made up of 3 normally open pressure switches and 1 normally closed pressure switch. Pressure switch 1 monitors shift valve 1 positioning, pressure switch 2 monitors shift valve 2 positioning, pressure switch 3 monitors shift valve 3 positioning, and pressure switch 4 monitors the position of the manual selector valve. The TCM provides a signal circuit to each of the pressure switches. The TCM constantly monitors the circuits to determine the position of the shift valves. The position of shift valves 1, 2, and 3 is controlled by 3 normally closed shift solenoids. When energized, shift solenoid 1 directs fluid pressure to shift valve 1, shift solenoid 2 directs fluid pressure to shift valve 2, and shift solenoid 3 directs fluid pressure to shift valve 3, which strokes the shift valves. When a shift valve is stroked, an exhaust passage is blocked and fluid pressure increases, closing the normally open pressure switch. The Diagnostic Trouble Code (DTC) will be set when the TCM detects that transmission fluid pressure switch 3 signal circuit is High when shift solenoid 3 is commanded ON for 1 s.

P0873 Buick Code - Transmission Fluid Pressure Switch 3 Circuit High Voltage

|Need more Information on the P0873 Buick Code?

Need more information on how to fix the P0873 Buick code? Get Access to Factory Service Manuals

|Need Help with the P0873 Buick Code?

Get the P0873 Buick code diagnosed by a professional: Find a repair shop in your area