|How is the P0872 BUICK code repair?
Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the P0872 BUICK code
The cost to diagnose the P0872 BUICK code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What is P0872 BUICK code meaning?
The 4th clutch pressure switch is located in the hydraulic passage to the 4th clutch. When oil pressure is supplied to the 4th clutch, the switch is grounded, LOW. When oil pressure is not supplied, the switch is open, HI. The PCM
receives the signal from the 4th clutch pressure switch to detect the fluid pressure status, in order to reduce the shift shock when shifting into 4th gear, from 3rd to 4th or 5th to 4th. If the 4th clutch pressure switch is ON when the gear ratio is not 4th gear, the PCM
determines it is a fault and Diagnostic Trouble Code (DTC) P0872 sets. DTC P0872 is a type C DTC. The Diagnostic Trouble Code (DTC) will set if the 4th clutch pressure switch is OFF when the transmission is in 5th gear for 2 seconds or greater.