P0872 2009 TOYOTA CAMRY - Transmission Fluid Pressure Sensor/Switch 'C' Circuit Low
P0872 2009 TOYOTA CAMRY Possible Causes
- Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly
- ATF Temperature Sensor harness is open or shorted
- ATF Temperature Sensor circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How is the P0872 2009 TOYOTA CAMRY code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the P0872 2009 TOYOTA CAMRY code
Labor: 1.0The cost to diagnose the P0872 2009 TOYOTA CAMRY code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
- Engine Light ON (or Service Engine Soon Warning Light)
P0872 2009 TOYOTA CAMRY MeaningThe Automatic Transmission Fluid (ATF) pressure switch No. 1 is installed in the shift solenoid valve ATF output passage. This switch is used to identify the malfunctioning part when a fail-safe operation is performed. If the shift solenoid valve malfunctions when the ATF pressure switch has a malfunction, a fail-safe operation will be performed. This fail-safe operation is different from the fail-safe operation performed when the solenoid valve malfunctions, and the ATF pressure switch is normal.
The Diagnostic Trouble Code (DTC) will set if the ATF pressure switch No. 1 OFF is detected twice when any of the gears from 1st to 4th engages normally.
More InformationNeed more information on how to fix the P0872 2009 TOYOTA CAMRY code?
Get Access to Factory Service Manuals