Engine-Codes - Cadillac - P0852 CADILLAC

P0852 CADILLAC Code - Park/Neutral Position Switch Circuit High Voltage

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3
Table of contents

|P0852 CADILLAC code possible causes

  • Faulty Park/Neutral Switch
  • Park/Neutral Switch harness is open or shorted
  • Park/Neutral Switch circuit poor electrical connection

|How is the P0852 CADILLAC code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|What is the cost to diagnose the P0852 CADILLAC code

Labor: 1.0

The cost to diagnose the P0852 CADILLAC code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are P0852 CADILLAC code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|What is P0852 CADILLAC code meaning?

The transmission manual shift shaft switch assembly, also known as the Internal Mode Switch (IMS), is a sliding contact switch attached to the manual shift shaft inside the transmission case. The Park/Neutral Position (PNP) Switch is integrated into the IMS and connects to the Transmission Control Module (TCM) lead-frame through a short wire harness. The 5 inputs to the TCM from the transmission manual shift shaft switch assembly indicate the transmission gear selector lever position. This information is used for engine start enable, engine controls as well as determining the transmission shift patterns. The state of each input is available for display on the scan tool. The five input parameters represented are Signal A, Signal B, Signal C, Signal P (Parity), and Signal N (Park/Neutral Start Signal). Park/Neutral Signal is sent from the Park/Neutral switch directly to the Engine Control Module (ECM) and is used for engine start enable. The Park/Neutral Signal circuit is not connected to the TCM internally; the circuit uses the TCM as a pass-through connector only. The ECM Park/Neutral diagnostic monitors the Park/Neutral Signal circuit to detect Low voltage when the ECM expects to see High voltage and High voltage when the ECM expects to see Low voltage.

|Need more information with the P0852 CADILLAC code?

Need more information on how to fix the P0852 CADILLAC code?
Get Access to Factory Service Manuals

|Need help with a P0852 CADILLAC code?

Get the P0852 Cadillac code diagnosed by a professional: Find a repair shop in your area