|How is the P0847 HONDA code repair?
Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the P0847 HONDA code
Labor: 1.0
The cost to diagnose the P0847 HONDA code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What is P0847 HONDA code meaning?
The 3rd clutch transmission fluid pressure switch is installed in the hydraulic pressure circuit to the 3rd clutch. When hydraulic pressure is supplied to the 3rd clutch, the switch is turned ON. When hydraulic pressure is not supplied to the 3rd clutch, the switch is turned OFF. The signal from the 3rd clutch transmission fluid pressure switch is input to the Powertrain Control Module (
PCM). The
PCM detects the hydraulic pressure supply conditions at the gear change to 3rd gear (2nd → 3rd, 4th → 3rd) to reduce the shock that occurs at the gear change. If the 3rd clutch transmission fluid pressure switch is ON while driving, and the speed ratio of the countershaft to the mainshaft is other than the 3rd ratio (the ratio is Neutral or 4th), the
PCM detects a 3rd clutch transmission fluid pressure switch failure, and a DTC is stored.