P0847 ACURA - 3rd Clutch Transmission Fluid Pressure Switch Circuit Short or Stuck ON
P0847 ACURA Possible Causes
- Faulty 3rd Clutch Transmission Fluid Pressure Switch
- 3rd Clutch Transmission Fluid Pressure Switch harness is open or shorted
- 3rd Clutch Transmission Fluid Pressure Switch circuit poor electrical connection
How is the P0847 ACURA code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the P0847 ACURA code
Labor: 1.0The cost to diagnose the P0847 ACURA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
- Engine Light ON (or Service Engine Soon Warning Light)
P0847 ACURA MeaningThe 3rd clutch transmission fluid pressure switch is installed in the hydraulic pressure circuit to the 3rd clutch. When hydraulic pressure is supplied to the 3rd clutch, the switch is turned ON. When hydraulic pressure is not supplied to the 3rd clutch, the switch is turned OFF. The signal from the 3rd clutch transmission fluid pressure switch is input to the Powertrain Control Module (PCM). The PCM detects the hydraulic pressure supply conditions at the gear change to 3rd gear (2nd → 3rd, 4th → 3rd) to reduce the shock that occurs at the gear change. If the 3rd clutch transmission fluid pressure switch is ON while driving, and the speed ratio of the countershaft to the mainshaft is other than the 3rd ratio (the ratio is Neutral or 4th), the PCM detects a 3rd clutch transmission fluid pressure switch failure, and a DTC is stored.
More InformationNeed more information on how to fix the P0847 ACURA code?
Get Access to Factory Service Manuals