P0845 DODGE - Transmission Fluid Pressure Sensor/Switch 'B' Circuit
P0845 DODGE Possible Causes
- Faulty Transmission Fluid Pressure Sensor 'B'
- Transmission Fluid Pressure Sensor 'B' harness is open or shorted
- Transmission Fluid Pressure Sensor 'B' poor electrical connection
- Transmission Valve Body
How do I fix code P0845 DODGE?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0845 DODGE code
Labor: 1.0The cost of diagnosing the P0845 DODGE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P0845 DODGE MeaningDTC P0845 will set if an error occurs in 2-4 pressure switch. TCM momentarily turns on element pressure to 2-4 clutch circuit to identify that pressure switch closes. If switch does not close after first test, switch is tested again. If switch does not close on second test, DTC will set. MIL illuminates and transmission system defaults to limp-in mode.
P0845 DODGE More InformationNeed more information on how to fix the P0845 DODGE code?
Get Access to Factory Service Manuals