P0806 Dodge Code - Clutch Position Sensor Circuit Range/Performance
Quick Answer
The P0806 diagnostic trouble code for Dodge vehicles refers to the Clutch Position Sensor Circuit Range/Performance. Common causes include Faulty clutch position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0806 Dodge indicates Clutch Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty clutch position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0806 Dodge Description
The P0806 diagnostic trouble code for Dodge vehicles refers to the Clutch Position Sensor Circuit Range/Performance. This code indicates that there is a malfunction in the circuit that is responsible for monitoring the position of the clutch in the vehicle. The clutch position sensor is essential for the proper operation of the transmission system, as it helps the engine control module (ECM) determine when to engage or disengage the clutch.
Common Causes of P0806 Dodge
- Faulty clutch position sensor
- Damaged wiring or connectors in the sensor circuit
- Corrosion in the sensor circuit
- Loose connections in the sensor circuit
- ECM software issue
Symptoms of P0806 Dodge
- Erratic shifting
- Poor acceleration
- Rough or delayed clutch engagement
- Decreased fuel efficiency
- Illuminated check engine light
How to Fix P0806 Dodge
- Begin by performing a visual inspection of the clutch position sensor and its wiring. Look for any signs of damage, corrosion, or loose connections.
- Test the clutch position sensor using a multimeter to check for proper functionality. Replace the sensor if it is faulty.
- Inspect and repair any damaged wiring or connectors in the sensor circuit.
- Clear the fault codes from the ECM using a diagnostic scanner and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, consult a professional mechanic for further diagnosis and repair.
Cost to Fix P0806 Dodge
The typical repair costs for addressing a P0806 code on a Dodge vehicle can range from $150 to $400, including parts and labor. However, it is important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates for a more precise estimate. Keep in mind that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less.
Need more information about the P0806 Dodge code?
Need more information on how to fix the P0806 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0806 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0806 Dodge Code
1. What does the OBDII code P0806 mean on a Dodge?
P0806 indicates an issue with the clutch position sensor circuit, specifically a range or performance problem where the sensor's signal is outside the expected parameters.
2. What are the symptoms of the P0806 code on a Dodge vehicle?
Common symptoms include difficulty shifting gears, erratic clutch pedal operation, reduced vehicle performance, and potentially an illuminated check engine light.
3. What causes the P0806 code to appear?
Causes can include a faulty clutch position sensor, damaged or corroded wiring in the sensor circuit, a misaligned sensor, or, in rare cases, a problem with the vehicle's powertrain control module (PCM).
4. Can I continue driving my Dodge with the P0806 code?
While it may be possible to drive the vehicle, ignoring the issue could lead to further damage to the transmission or clutch system. It's best to address the problem promptly.
5. How is the P0806 code diagnosed?
A technician will use a scan tool to check for stored codes, inspect the clutch position sensor and its wiring, test the sensor's signal, and verify the alignment and operation of the clutch system.
6. How do you fix the P0806 code on a Dodge?
Repairs may involve replacing the clutch position sensor, repairing or replacing damaged wiring or connectors, realigning the sensor, or addressing any underlying transmission issues.
7. How much does it cost to fix the P0806 code?
The cost depends on the exact cause but typically ranges from $150 to $300 for parts and labor, with variations depending on your Dodge model and location.
8. Can a faulty clutch position sensor cause transmission damage?
Yes, if the sensor is providing incorrect data, it may lead to improper clutch engagement or shifting, potentially causing wear or damage to the transmission over time.
9. Does the P0806 code always mean the clutch position sensor is bad?
No, the issue could also stem from wiring problems, connector issues, or even a malfunction in the PCM, so proper diagnosis is crucial.
10. Can I reset the P0806 code without fixing the problem?
While clearing the code temporarily removes it, the issue will likely return unless the underlying problem is resolved.
Discuss the causes and fixes for P0806 Dodge OBDII Code
Code P0806 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.