P0800 GMC Code - Active Transfer Case Control Module Requested MIL Illumination
Quick Answer
The P0800 GMC code indicates that the Active Transfer Case Control Module (ATCM) has requested the Malfunction Indicator Lamp (MIL) to illuminate on the vehicle's dashboard. Common causes include Faulty transfer case control module, Wiring harness issues or shorts, Sensor malfunction within the system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0800 GMC indicates Active Transfer Case Control Module Requested MIL Illumination.
- Common causes
- Common causes include Faulty transfer case control module, Wiring harness issues or shorts, Sensor malfunction within the system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0800 GMC Description
The P0800 GMC code indicates that the Active Transfer Case Control Module (ATCM) has requested the Malfunction Indicator Lamp (MIL) to illuminate on the vehicle's dashboard. The transfer case control module is responsible for managing the vehicle's four-wheel drive system, which allows the driver to switch between different drive modes for optimal performance on various terrains. When this code appears, it means that the ATCM has detected a fault or issue in the system that requires attention.
Common Causes of P0800 GMC
- Faulty transfer case control module
- Wiring harness issues or shorts
- Sensor malfunction within the system
- Communication error between modules or sensors
- Water or debris intrusion into the transfer case components
Symptoms of P0800 GMC
- Illumination of the Malfunction Indicator Lamp (MIL) on the dashboard
- Inability to engage or disengage four-wheel drive modes
- Unusual noises coming from the transfer case area
- Poor traction or performance in off-road or slippery conditions
How to Fix P0800 GMC
- Begin by using a diagnostic scanner to retrieve the specific fault codes and data related to the ATCM.
- Inspect the wiring harness for any visible damage, corrosion, or loose connections. Repair or replace as needed.
- Test the sensors within the four-wheel drive system to ensure they are functioning correctly. Replace any faulty sensors.
- Check the transfer case control module for any signs of damage or malfunction. Replace the module if necessary.
- Clear the fault codes from the system and perform a test drive to verify that the issue has been resolved.
Cost to Fix P0800 GMC
The cost of repairing a P0800 GMC code can vary depending on the specific cause of the issue and the labor rates in your area. Generally, you can expect to pay anywhere from $200 to $600 for parts and labor. Keep in mind that diagnostic time and labor rates at auto repair shops can fluctuate based on location, vehicle make and model, and the complexity of the repair. It's advisable to contact local repair shops for a more accurate estimate.
Need more information about the P0800 GMC code?
Need more information on how to fix the P0800 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0800 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P0800 2014 GMC Sierra — Active Transfer Case Control Module Requested MIL Illumination
- P0800 2015 GMC Sierra — Active Transfer Case Control Module Requested MIL Illumination
- P0800 2016 GMC Sierra — Active Transfer Case Control Module Requested MIL Illumination
- P0800 2017 GMC Sierra — Active Transfer Case Control Module Requested MIL Illumination
- P0800 2018 GMC Sierra — Active Transfer Case Control Module Requested MIL Illumination
Frequently Asked Questions about P0800 GMC Code
1. What are the common symptoms of OBDII code P0800 in a GMC vehicle?
- Common symptoms of P0800 may include the check engine light illuminating, issues with the transfer case control module, and possible difficulty shifting gears.
2. What could cause OBDII code P0800 to trigger in a GMC vehicle?
- The most common cause of P0800 is a malfunction within the active transfer case control module, which may be due to electrical faults, module failure, or wiring issues.
3. How can I diagnose OBDII code P0800 in my GMC vehicle?
- Diagnosing P0800 typically involves using an OBDII scanner to read the code, checking the transfer case control module for any visible damage or loose connections, and performing a thorough inspection of the wiring harness.
4. Is it safe to drive with OBDII code P0800 illuminated in my GMC vehicle?
- It is generally not recommended to drive with the P0800 code illuminated, as it may lead to further damage to the transfer case control module or affect the vehicle's performance.
5. Can I reset OBDII code P0800 in my GMC without repairing the issue?
- While you can clear the code temporarily, it is important to address the underlying issue causing P0800 to prevent it from reoccurring and potentially causing more serious problems.
6. What are some repair tips for resolving OBDII code P0800 in a GMC vehicle?
- Repair tips for P0800 may include checking and repairing any damaged wiring, replacing the transfer case control module if necessary, and ensuring all connections are secure.
7. How much does it typically cost to repair OBDII code P0800 in a GMC vehicle?
- The cost of repairing P0800 can vary depending on the exact cause of the issue, but it may involve parts and labor expenses ranging from $200 to $600 or more.
8. Can a DIY enthusiast fix OBDII code P0800 in a GMC vehicle?
- Depending on their skill level and access to tools, a DIY enthusiast may be able to address P0800 by following repair guides, but it is recommended to consult a professional if unsure.
9. Will OBDII code P0800 cause my GMC vehicle to fail an emissions test?
- Yes, if the check engine light is illuminated due to P0800, your GMC vehicle may fail an emissions test, as the code indicates a potential issue with the emissions control system.
10. How often does OBDII code P0800 occur in GMC vehicles?
- OBDII code P0800 is not extremely common, but it can occur in GMC vehicles, particularly in models with active transfer case control modules that may experience electrical or module failures.
Discuss the causes and fixes for P0800 GMC OBDII Code
Code P0800 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.