P07C0 2018 GMC Sierra Code - Transmission Input Speed Sensor Circuit High Voltage
Quick Answer
The P07C0 diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates a Transmission Input Speed Sensor Circuit High Voltage. Common causes include Faulty transmission input speed sensor: The sensor itself may be malfunctioning, sending incorrect voltage readings to the PCM, Wiring issues: Damaged or corroded wiring connecting the sensor to the PCM can cause high voltage readings, PCM software issue: A software glitch in the PCM can also lead to incorrect voltage readings from the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P07C0 2018 GMC Sierra indicates Transmission Input Speed Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty transmission input speed sensor: The sensor itself may be malfunctioning, sending incorrect voltage readings to the PCM, Wiring issues: Damaged or corroded wiring connecting the sensor to the PCM can cause high voltage readings, PCM software issue: A software glitch in the PCM can also lead to incorrect voltage readings from the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P07C0 2018 GMC Sierra Description
The P07C0 diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates a Transmission Input Speed Sensor Circuit High Voltage. This code is triggered when the powertrain control module (PCM) detects a higher than normal voltage from the transmission input speed sensor. The transmission input speed sensor is responsible for monitoring the speed of the input shaft into the transmission. This information is crucial for the PCM to determine the appropriate shift points for the transmission. When the voltage from the sensor is too high, it can lead to incorrect shift points, harsh shifting, and even transmission slippage.
Common Causes of P07C0 2018 GMC Sierra
- Faulty transmission input speed sensor: The sensor itself may be malfunctioning, sending incorrect voltage readings to the PCM.
- Wiring issues: Damaged or corroded wiring connecting the sensor to the PCM can cause high voltage readings.
- PCM software issue: A software glitch in the PCM can also lead to incorrect voltage readings from the sensor.
- Transmission fluid contamination: Contaminated transmission fluid can affect the sensor's performance and lead to high voltage readings.
- Electrical system issues: Problems with the vehicle's electrical system, such as a faulty ground connection, can also trigger this code.
Symptoms of P07C0 2018 GMC Sierra
- Harsh or delayed shifting: The transmission may shift erratically or with a delay, causing a jerking sensation while driving.
- Transmission slipping: The transmission may slip out of gear or struggle to maintain the correct gear, leading to a loss of power and acceleration.
- Check Engine Light: The Check Engine Light may illuminate on the dashboard to indicate a problem with the transmission input speed sensor circuit.
- Reduced fuel efficiency: Due to incorrect shift points, the engine may not operate efficiently, leading to decreased fuel economy.
- Transmission overheating: The transmission may overheat due to the increased workload caused by the faulty input speed sensor.
How to Fix P07C0 2018 GMC Sierra
- Diagnose the issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the transmission input speed sensor and related wiring.
- Replace the transmission input speed sensor: If the sensor is faulty, replace it with a new one following the manufacturer's guidelines.
- Repair or replace damaged wiring: Repair any damaged or corroded wiring connecting the sensor to the PCM.
- Clear the DTC: After completing the repairs, clear the DTC from the PCM memory and test drive the vehicle to ensure the issue has been resolved.
- Perform a transmission fluid flush: If the transmission fluid is contaminated, perform a complete flush and refill with fresh fluid to ensure optimal performance.
Cost to Fix P07C0 2018 GMC Sierra
The cost of repairing a Transmission Input Speed Sensor Circuit High Voltage issue can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the cost of parts for this repair can range from $100 to $300, while labor costs can range from $150 to $300. Overall, the total repair cost can be anywhere from $250 to $600. It's important to note that these are rough estimates, and actual costs may vary based on the location of the repair shop, the make and model of the vehicle, and any additional repairs that may be needed. It's recommended to consult with a professional mechanic to get an accurate cost estimate for your specific situation.
Need more information about the P07C0 2018 GMC Sierra code?
Need more information on how to fix the P07C0 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P07C0 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P07C0 2018 GMC Sierra Code
No Frequently Asked Questions about P07C0 2018 GMC Sierra Code found.
Discuss the causes and fixes for P07C0 2018 GMC Sierra OBDII Code
Code P07C0 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.