P07BF 2018 GMC Sierra Code - Transmission Input Speed Sensor Circuit Low Voltage
Quick Answer
The P07BF diagnostic trouble code (DTC) specifically pertains to the Transmission Input Speed Sensor Circuit Low Voltage in a 2018 GMC Sierra. Common causes include Faulty input speed sensor, Damaged wiring or connectors in the sensor circuit, Transmission control module issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P07BF 2018 GMC Sierra indicates Transmission Input Speed Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty input speed sensor, Damaged wiring or connectors in the sensor circuit, Transmission control module issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P07BF 2018 GMC Sierra Description
The P07BF diagnostic trouble code (DTC) specifically pertains to the Transmission Input Speed Sensor Circuit Low Voltage in a 2018 GMC Sierra. This code indicates that there is an issue with the transmission input speed sensor circuit, resulting in a lower than normal voltage being detected by the vehicle's computer system. The input speed sensor is responsible for monitoring the speed of the input shaft in the transmission, which is crucial for the proper operation of the transmission. When the voltage is detected as low, it can lead to various issues with the transmission's performance.
Common Causes of P07BF 2018 GMC Sierra
- Faulty input speed sensor
- Damaged wiring or connectors in the sensor circuit
- Transmission control module issues
- Low transmission fluid levels
- Electrical system issues
Symptoms of P07BF 2018 GMC Sierra
- Erratic or harsh shifting
- Transmission slipping
- Delayed or no shifting
- Check Engine Light illuminated
- Reduced fuel efficiency
How to Fix P07BF 2018 GMC Sierra
- Diagnose the root cause of the low voltage signal by using a scan tool to retrieve the specific fault codes and testing the input speed sensor and its circuit.
- Replace the faulty input speed sensor if necessary, ensuring it is properly installed and connected.
- Inspect and repair any damaged wiring or connectors in the sensor circuit.
- Check and refill transmission fluid levels if low, and inspect for any leaks or other issues.
- Clear the fault codes and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P07BF 2018 GMC Sierra
The typical repair costs for resolving a Transmission Input Speed Sensor Circuit Low Voltage issue can vary depending on the specific cause of the problem. In general, the cost of replacing the input speed sensor and addressing any related wiring or transmission control module issues can range from $200 to $500, including parts and labor. However, it's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's recommended to check local rates for a more accurate estimate. Labor rates typically range between $80 and $150 per hour, with rates potentially higher at dealerships or metropolitan areas and lower at independent shops.
Need more information about the P07BF 2018 GMC Sierra code?
Need more information on how to fix the P07BF 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P07BF 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P07BF 2018 GMC Sierra Code
What does the OBD-II code P07BF mean in a 2018 GMC Sierra?
The code P07BF indicates a "Transmission Input Speed Sensor Circuit Low Voltage," meaning the sensor is detecting an abnormally low voltage signal.
What are the common symptoms of code P07BF in a 2018 GMC Sierra?
Symptoms may include erratic or delayed shifting, poor acceleration, transmission slipping, and the Check Engine Light illuminated.
What causes the P07BF code in a 2018 GMC Sierra?
Causes can include a faulty input speed sensor, damaged wiring or connectors in the sensor circuit, or issues with the transmission control module (TCM).
How can I diagnose the P07BF code in my 2018 GMC Sierra?
You can diagnose the issue by inspecting the wiring and connectors for damage, testing the input speed sensor for proper function, and checking the voltage signal with a multimeter.
Can the P07BF code affect the transmission's performance?
Yes, this code can cause transmission shifting issues and affect overall drivability if not resolved promptly.
How do I fix the P07BF code in a 2018 GMC Sierra?
Repairs may involve replacing the input speed sensor, repairing damaged wiring or connectors, or reprogramming or replacing the transmission control module.
Can I drive my 2018 GMC Sierra with the P07BF code?
Driving with this code is not recommended as it can lead to further transmission damage and unsafe driving conditions.
How much does it cost to fix the P07BF code on a 2018 GMC Sierra?
Repair costs vary, but replacing the input speed sensor generally costs between $150-$300, while wiring repairs or TCM replacement may cost more.
Does the P07BF code require special tools to fix?
Basic tools like a multimeter, OBD-II scanner, and wiring repair equipment are often sufficient, but advanced diagnostics may require professional tools.
Can the P07BF code be cleared without repairing the issue?
Clearing the code without fixing the root cause is not advised, as the issue will likely return and could worsen over time.
Discuss the causes and fixes for P07BF 2018 GMC Sierra OBDII Code
Code P07BF 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.